This is the latest recevied telemetry packets stored in our database for station/object KA5WMY-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1754221903 | 468 | 627 | 0 | 0 | 0 |
| 1754221898 | 470 | 627 | 0 | 0 | 0 |
| 1754221847 | 472 | 627 | 0 | 0 | 0 |
| 1754221764 | 472 | 626 | 0 | 0 | 0 |
| 1754221759 | 469 | 626 | 0 | 0 | 0 |
| 1754221652 | 435 | 626 | 0 | 0 | 0 |
| 1754221609 | 444 | 625 | 0 | 0 | 0 |
| 1754221604 | 443 | 625 | 0 | 0 | 0 |
| 1754221476 | 469 | 624 | 0 | 0 | 0 |
| 1754221378 | 436 | 623 | 0 | 0 | 0 |
| 1754221280 | 470 | 623 | 0 | 0 | 0 |
| 1754221182 | 470 | 621 | 0 | 0 | 0 |
| 1754221178 | 471 | 621 | 0 | 0 | 0 |
| 1754221173 | 469 | 620 | 0 | 0 | 0 |
| 1754221161 | 471 | 620 | 0 | 0 | 0 |
| 1754221048 | 450 | 618 | 0 | 0 | 0 |
| 1754220989 | 470 | 616 | 0 | 0 | 0 |
| 1754220972 | 471 | 615 | 0 | 0 | 0 |
| 1754220949 | 469 | 614 | 0 | 0 | 0 |
| 1754220935 | 470 | 613 | 0 | 0 | 0 |
| 1754177941 | 423 | 635 | 0 | 0 | 0 |
| 1754176139 | 465 | 640 | 0 | 0 | 0 |
| 1754176102 | 466 | 639 | 0 | 0 | 0 |
| 1754176082 | 467 | 639 | 0 | 0 | 0 |
| 1754176032 | 463 | 639 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)