APRS Track Direct

My position About ☰

reset

IR1ZXE-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR1ZXE-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1786723415	13.04 Volt	330 Pkt	70 Pkt	84 Pcnt
1786723115	13.04 Volt	350 Pkt	70 Pkt	84 Pcnt
1786722815	13.04 Volt	360 Pkt	80 Pkt	83 Pcnt
1786722515	13.04 Volt	380 Pkt	80 Pkt	84 Pcnt
1786722215	13.04 Volt	400 Pkt	90 Pkt	84 Pcnt
1786721915	13.04 Volt	410 Pkt	90 Pkt	84 Pcnt
1786721615	13.04 Volt	430 Pkt	100 Pkt	85 Pcnt
1786721315	13.04 Volt	440 Pkt	100 Pkt	85 Pcnt
1786721015	13.04 Volt	460 Pkt	110 Pkt	85 Pcnt
1786720715	13.04 Volt	470 Pkt	110 Pkt	87 Pcnt
1786720415	13.04 Volt	470 Pkt	110 Pkt	87 Pcnt
1786720115	13.04 Volt	490 Pkt	110 Pkt	89 Pcnt
1786719815	13.04 Volt	480 Pkt	110 Pkt	88 Pcnt
1786719515	13.04 Volt	460 Pkt	110 Pkt	87 Pcnt
1786719215	13.04 Volt	450 Pkt	100 Pkt	86 Pcnt
1786718915	13.04 Volt	430 Pkt	100 Pkt	85 Pcnt
1786718615	13.04 Volt	410 Pkt	100 Pkt	84 Pcnt
1786718315	13.04 Volt	380 Pkt	90 Pkt	82 Pcnt
1786718015	13.04 Volt	360 Pkt	80 Pkt	80 Pcnt
1786717715	13.04 Volt	330 Pkt	80 Pkt	79 Pcnt
1786717415	13.04 Volt	310 Pkt	70 Pkt	76 Pcnt
1786717115	13.04 Volt	300 Pkt	70 Pkt	74 Pcnt
1786716815	13.04 Volt	280 Pkt	60 Pkt	72 Pcnt
1786716515	13.04 Volt	270 Pkt	60 Pkt	70 Pcnt
1786716220	13.04 Volt	270 Pkt	60 Pkt	69 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)