This is the latest recevied telemetry packets stored in our database for station/object KK7UBZ-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1792256752 | 80 | 3930 | 0 | 0 | 0 |
| 1792256630 | 80 | 3904 | 0 | 0 | 0 |
| 1792256509 | 79 | 3877 | 0 | 0 | 0 |
| 1792256387 | 80 | 3855 | 0 | 0 | 0 |
| 1792256266 | 80 | 3838 | 0 | 0 | 0 |
| 1792256144 | 79 | 3829 | 0 | 0 | 0 |
| 1792256022 | 80 | 3827 | 0 | 0 | 0 |
| 1792255901 | 80 | 3834 | 0 | 0 | 0 |
| 1792255779 | 80 | 3848 | 0 | 0 | 0 |
| 1792255658 | 80 | 3869 | 0 | 0 | 0 |
| 1792255536 | 80 | 3894 | 0 | 0 | 0 |
| 1792255414 | 81 | 3920 | 0 | 0 | 0 |
| 1792255293 | 81 | 3943 | 0 | 0 | 0 |
| 1792255172 | 81 | 3960 | 0 | 0 | 0 |
| 1792255050 | 80 | 3971 | 0 | 0 | 0 |
| 1792254929 | 81 | 3976 | 0 | 0 | 0 |
| 1792254807 | 81 | 3981 | 0 | 0 | 0 |
| 1792254686 | 82 | 3988 | 0 | 0 | 0 |
| 1792254565 | 82 | 3996 | 0 | 0 | 0 |
| 1792254443 | 81 | 4007 | 0 | 0 | 0 |
| 1792254322 | 82 | 4020 | 0 | 0 | 0 |
| 1792254200 | 82 | 4035 | 0 | 0 | 0 |
| 1792254079 | 82 | 4052 | 0 | 0 | 0 |
| 1792253958 | 82 | 4071 | 0 | 0 | 0 |
| 1792253837 | 83 | 4090 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)