APRS Track Direct

My position About ☰

reset

IR1BY-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR1BY-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RxPkt*	TxPkt*	Batt*	Volt Aux*
1750203967	43 Pkt/10m	0 Pkt/10m	4.06 Volt	0.2 Volt
1750202466	53 Pkt/10m	0 Pkt/10m	4.06 Volt	0.2 Volt
1750200964	60 Pkt/10m	0 Pkt/10m	4.06 Volt	0.2 Volt
1750199464	37 Pkt/10m	0 Pkt/10m	4.06 Volt	0.2 Volt
1750197963	40 Pkt/10m	0 Pkt/10m	4.06 Volt	0.2 Volt
1750196462	40 Pkt/10m	0 Pkt/10m	4.04 Volt	0.2 Volt
1750194961	41 Pkt/10m	0 Pkt/10m	4.06 Volt	0.2 Volt
1750193460	33 Pkt/10m	0 Pkt/10m	4.06 Volt	0.3 Volt
1750191960	0 Pkt/10m	0 Pkt/10m	4.06 Volt	0.2 Volt
1750190458	3 Pkt/10m	0 Pkt/10m	4.06 Volt	0.2 Volt
1750188957	25 Pkt/10m	0 Pkt/10m	4.04 Volt	0.2 Volt
1750187456	3 Pkt/10m	0 Pkt/10m	4.08 Volt	0.2 Volt
1750187312	23 Pkt/10m	0 Pkt/10m	4.04 Volt	0.2 Volt
1750185955	33 Pkt/10m	0 Pkt/10m	4.06 Volt	0.2 Volt
1750184454	22 Pkt/10m	0 Pkt/10m	4.04 Volt	0.2 Volt
1750182953	31 Pkt/10m	0 Pkt/10m	4.06 Volt	0.2 Volt
1750181453	23 Pkt/10m	0 Pkt/10m	4.06 Volt	0.2 Volt
1750179952	24 Pkt/10m	0 Pkt/10m	4.06 Volt	0.2 Volt
1750178451	26 Pkt/10m	0 Pkt/10m	4.06 Volt	0.2 Volt
1750176949	44 Pkt/10m	0 Pkt/10m	4.06 Volt	0.2 Volt
1750175448	28 Pkt/10m	0 Pkt/10m	4.04 Volt	0.2 Volt
1750173947	24 Pkt/10m	0 Pkt/10m	4.06 Volt	0.2 Volt
1750172446	29 Pkt/10m	0 Pkt/10m	4.06 Volt	0.2 Volt
1750170944	33 Pkt/10m	0 Pkt/10m	4.06 Volt	0.2 Volt
1750169443	27 Pkt/10m	0 Pkt/10m	4.06 Volt	0.2 Volt

*Used Equation Coefficients:

RxPkt: 0, 1, 0

TxPkt: 0, 1, 0

Batt: 0, 0.0196, 0

Volt Aux: 0, 0.1, 0

Ampere Aux: 0, 0.01, -1.27

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)