APRS Track Direct

My position About ☰

reset

XE2MFT-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object XE2MFT-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1754146957	0.69 Load	50.46 DegC	101 Mb	590 Pkt	511 Pkt
1754146657	0.58 Load	49.39 DegC	91 Mb	390 Pkt	101 Pkt
1754146356	0.58 Load	49.39 DegC	94 Mb	288 Pkt	217 Pkt
1754146057	0.53 Load	49.93 DegC	97 Mb	586 Pkt	501 Pkt
1754145757	0.58 Load	49.93 DegC	96 Mb	383 Pkt	67 Pkt
1754145456	0.61 Load	50.46 DegC	100 Mb	496 Pkt	61 Pkt
1754145157	0.65 Load	49.39 DegC	98 Mb	722 Pkt	659 Pkt
1754144858	0.66 Load	49.39 DegC	101 Mb	548 Pkt	84 Pkt
1754144556	0.73 Load	49.93 DegC	102 Mb	334 Pkt	54 Pkt
1754144257	0.68 Load	49.39 DegC	100 Mb	528 Pkt	507 Pkt
1754143957	0.7 Load	49.93 DegC	94 Mb	371 Pkt	205 Pkt
1754143656	0.61 Load	50.46 DegC	101 Mb	324 Pkt	65 Pkt
1754143357	0.61 Load	49.93 DegC	96 Mb	498 Pkt	508 Pkt
1754143057	0.58 Load	49.93 DegC	90 Mb	291 Pkt	80 Pkt
1754142756	0.69 Load	49.93 DegC	92 Mb	286 Pkt	192 Pkt
1754142457	0.76 Load	49.93 DegC	98 Mb	600 Pkt	518 Pkt
1754142157	0.78 Load	49.93 DegC	91 Mb	342 Pkt	71 Pkt
1754141856	0.75 Load	51 DegC	94 Mb	317 Pkt	68 Pkt
1754141557	0.64 Load	49.39 DegC	96 Mb	552 Pkt	666 Pkt
1754141257	0.53 Load	49.93 DegC	98 Mb	254 Pkt	53 Pkt
1754140956	0.57 Load	50.46 DegC	96 Mb	260 Pkt	71 Pkt
1754140657	0.57 Load	50.46 DegC	97 Mb	643 Pkt	501 Pkt
1754140358	0.65 Load	50.46 DegC	96 Mb	324 Pkt	206 Pkt
1754140056	0.71 Load	51 DegC	102 Mb	325 Pkt	58 Pkt
1754139757	0.81 Load	50.46 DegC	105 Mb	587 Pkt	502 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)