This is the latest recevied telemetry packets stored in our database for station/object W9WWI-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Solar* | Temp* | Sats* | Lock* | Value5* |
|---|---|---|---|---|---|
| 1792263993 | 4.78 Volts | -18 Deg C | 9 | 1 | 1 |
| 1792263867 | 4.78 Volts | -17 Deg C | 9 | 1 | 1 |
| 1792263741 | 4.78 Volts | -17 Deg C | 9 | 1 | 1 |
| 1792263612 | 4.78 Volts | -19 Deg C | 9 | 1 | 1 |
| 1792263483 | 4.76 Volts | -16 Deg C | 9 | 1 | 1 |
| 1792263357 | 4.78 Volts | -17 Deg C | 9 | 1 | 1 |
| 1792263231 | 4.82 Volts | -16 Deg C | 9 | 1 | 1 |
| 1792263111 | 4.72 Volts | -12 Deg C | 9 | 1 | 1 |
| 1792262982 | 4.7 Volts | -14 Deg C | 9 | 1 | 1 |
| 1792262850 | 4.72 Volts | -14 Deg C | 8 | 1 | 1 |
| 1792262718 | 4.72 Volts | -13 Deg C | 8 | 1 | 1 |
| 1792262589 | 4.7 Volts | -12 Deg C | 8 | 1 | 1 |
| 1792262460 | 4.7 Volts | -11 Deg C | 8 | 1 | 1 |
| 1792262328 | 4.7 Volts | -10 Deg C | 8 | 1 | 1 |
| 1792262196 | 4.68 Volts | -9 Deg C | 8 | 1 | 1 |
| 1792262064 | 4.72 Volts | -10 Deg C | 8 | 1 | 1 |
| 1792261941 | 4.66 Volts | -8 Deg C | 8 | 1 | 1 |
| 1792261809 | 4.7 Volts | -7 Deg C | 8 | 1 | 1 |
| 1792261686 | 4.66 Volts | -7 Deg C | 8 | 1 | 1 |
| 1792261557 | 4.7 Volts | -9 Deg C | 8 | 1 | 1 |
| 1792261434 | 4.66 Volts | -8 Deg C | 8 | 1 | 1 |
| 1792261305 | 4.68 Volts | -6 Deg C | 8 | 1 | 1 |
| 1792261182 | 4.66 Volts | -2 Deg C | 8 | 1 | 1 |
| 1792261056 | 4.64 Volts | -4 Deg C | 8 | 1 | 1 |
| 1792260927 | 4.72 Volts | -4 Deg C | 8 | 6 | 1 |
*Used Equation Coefficients:
Solar: 0, 0.01, 0
Temp: 0, 1, -273
Sats: 0, 1, 0
Lock: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)