This is the latest recevied telemetry packets stored in our database for station/object E24OWX-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
|---|---|---|---|---|---|
| 1732290598 | 0 Pkt | 0 Pkt | 0 Pkt | -39 dBm | 0 % |
| 1732289676 | 0 Pkt | 0 Pkt | 0 Pkt | -40 dBm | 0 % |
| 1732288754 | 0 Pkt | 0 Pkt | 0 Pkt | -40 dBm | 0 % |
| 1732287832 | 0 Pkt | 0 Pkt | 0 Pkt | -40 dBm | 0 % |
| 1732286910 | 0 Pkt | 0 Pkt | 0 Pkt | -40 dBm | 0 % |
| 1732285988 | 0 Pkt | 0 Pkt | 0 Pkt | -42 dBm | 0 % |
| 1732285066 | 0 Pkt | 0 Pkt | 0 Pkt | -41 dBm | 0 % |
| 1732284144 | 0 Pkt | 0 Pkt | 0 Pkt | -40 dBm | 0 % |
| 1732283222 | 0 Pkt | 0 Pkt | 0 Pkt | -40 dBm | 0 % |
| 1732282300 | 0 Pkt | 0 Pkt | 0 Pkt | -40 dBm | 0 % |
| 1732281378 | 0 Pkt | 0 Pkt | 0 Pkt | -40 dBm | 0 % |
| 1732280457 | 0 Pkt | 0 Pkt | 0 Pkt | -41 dBm | 0 % |
| 1732279534 | 0 Pkt | 0 Pkt | 0 Pkt | -41 dBm | 0 % |
| 1732278612 | 0 Pkt | 0 Pkt | 0 Pkt | -41 dBm | 0 % |
| 1732277690 | 0 Pkt | 0 Pkt | 0 Pkt | -41 dBm | 0 % |
| 1732276768 | 0 Pkt | 0 Pkt | 0 Pkt | -40 dBm | 0 % |
| 1732275846 | 0 Pkt | 0 Pkt | 0 Pkt | -42 dBm | 0 % |
| 1732274924 | 0 Pkt | 0 Pkt | 0 Pkt | -41 dBm | 0 % |
| 1732274002 | 0 Pkt | 0 Pkt | 0 Pkt | -42 dBm | 0 % |
| 1732273080 | 0 Pkt | 0 Pkt | 0 Pkt | -41 dBm | 0 % |
| 1732272158 | 0 Pkt | 0 Pkt | 0 Pkt | -41 dBm | 0 % |
| 1732271236 | 0 Pkt | 0 Pkt | 0 Pkt | -41 dBm | 0 % |
| 1732270314 | 0 Pkt | 0 Pkt | 0 Pkt | -42 dBm | 0 % |
| 1732269392 | 0 Pkt | 0 Pkt | 0 Pkt | -41 dBm | 0 % |
| 1732268470 | 0 Pkt | 0 Pkt | 0 Pkt | -40 dBm | 0 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)