This is the latest recevied telemetry packets stored in our database for station/object SP2MHC-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1794905286 | 991.7 hPa | 5.7 C deg | 90 % | 999.2 hPa | 0 C deg |
| 1794903457 | 991.8 hPa | 7.4 C deg | 89.5 % | 999.3 hPa | 0 C deg |
| 1794901627 | 991.9 hPa | 4.1 C deg | 100 % | 999.5 hPa | 0 C deg |
| 1794899797 | 992 hPa | 4.4 C deg | 100 % | 999.6 hPa | 0 C deg |
| 1794897966 | 992.4 hPa | 4.7 C deg | 100 % | 1000 hPa | 0 C deg |
| 1794896136 | 992.2 hPa | 4.3 C deg | 100 % | 999.8 hPa | 0 C deg |
| 1794894307 | 992 hPa | 4 C deg | 100 % | 999.6 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)