This is the latest recevied telemetry packets stored in our database for station/object WA6ODP-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786727883 | 1335 | 70.5 | 37 | 60.5 | 0 |
| 1786727581 | 1335 | 70.1 | 37 | 60.1 | 0 |
| 1786726683 | 1335 | 69.6 | 37 | 58.8 | 0 |
| 1786725782 | 1334 | 68.8 | 35.9 | 58.8 | 0 |
| 1786725483 | 1335 | 68.6 | 36.5 | 58.6 | 0 |
| 1786724282 | 1336 | 67.7 | 35.4 | 57.8 | 0 |
| 1786723981 | 1334 | 67.6 | 35.4 | 57.5 | 0 |
| 1786723084 | 1334 | 67 | 35.4 | 56.9 | 0 |
| 1786722182 | 1336 | 66.4 | 35.4 | 56.5 | 0 |
| 1786721882 | 1335 | 66.3 | 34.3 | 56.3 | 0 |
| 1786720683 | 1335 | 65.8 | 34.3 | 55.7 | 0 |
| 1786720381 | 1335 | 65.6 | 34.3 | 55.6 | 0 |
| 1786719483 | 1336 | 65.3 | 34.3 | 55.2 | 0 |
| 1786718582 | 1335 | 64.8 | 33.8 | 54.8 | 0 |
| 1786718283 | 1334 | 65 | 33.2 | 54.8 | 0 |
| 1786717083 | 1336 | 64.6 | 33.2 | 54.6 | 0 |
| 1786716781 | 1335 | 64.5 | 34.3 | 54.5 | 0 |
| 1786715883 | 1336 | 64.5 | 34.3 | 54.3 | 0 |
| 1786714982 | 1335 | 64.5 | 34.3 | 54.2 | 0 |
| 1786714682 | 1336 | 64.5 | 33.8 | 54.2 | 0 |
| 1786713483 | 1336 | 64.5 | 33.8 | 54.3 | 0 |
| 1786713181 | 1335 | 64.4 | 33.8 | 54.3 | 0 |
| 1786712282 | 1336 | 64.6 | 33.8 | 54.4 | 0 |
| 1786711382 | 1335 | 64.5 | 33.8 | 54.3 | 0 |
| 1786711083 | 1335 | 64.6 | 33.2 | 54.3 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 1000
Value2: 0, 0.1, 0
Value3: 0, 0.1, 0
Value4: 0, 0.1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)