APRS Track Direct

My position About ☰

reset

N5GAN-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N5GAN-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1758212356	106 Pkts	99 Pkts	46 Pkts	25 C
1758210556	99 Pkts	88 Pkts	35 Pkts	24 C
1758208757	160 Pkts	149 Pkts	54 Pkts	24 C
1758206956	210 Pkts	197 Pkts	69 Pkts	22 C
1758205156	185 Pkts	175 Pkts	55 Pkts	22 C
1758203357	242 Pkts	225 Pkts	77 Pkts	21 C
1758201556	226 Pkts	207 Pkts	59 Pkts	20 C
1758199756	204 Pkts	189 Pkts	78 Pkts	20 C
1758197956	179 Pkts	168 Pkts	64 Pkts	21 C
1758196156	112 Pkts	102 Pkts	39 Pkts	21 C
1758194356	114 Pkts	104 Pkts	37 Pkts	20 C
1758192556	137 Pkts	123 Pkts	50 Pkts	21 C
1758190756	113 Pkts	101 Pkts	42 Pkts	20 C
1758188956	92 Pkts	78 Pkts	33 Pkts	21 C
1758187156	92 Pkts	78 Pkts	42 Pkts	21 C
1758185356	106 Pkts	91 Pkts	47 Pkts	21 C
1758183556	104 Pkts	90 Pkts	47 Pkts	21 C
1758181756	105 Pkts	88 Pkts	44 Pkts	21 C
1758179956	90 Pkts	73 Pkts	40 Pkts	21 C
1758178156	113 Pkts	96 Pkts	45 Pkts	21 C
1758176356	105 Pkts	89 Pkts	40 Pkts	21 C
1758174556	86 Pkts	72 Pkts	36 Pkts	21 C
1758172756	89 Pkts	76 Pkts	36 Pkts	22 C
1758170956	82 Pkts	75 Pkts	31 Pkts	21 C
1758169156	66 Pkts	62 Pkts	32 Pkts	22 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)