APRS Track Direct

My position About ☰

reset

W1DMR-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W1DMR-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Rx10m*
1836274819	14.25 Volt	960 Pkt	69 Pcnt	127 Pkt
1836274520	14.25 Volt	950 Pkt	69 Pcnt	136 Pkt
1836274369	14.25 Volt	960 Pkt	69 Pcnt	143 Pkt
1836274220	14.25 Volt	960 Pkt	70 Pcnt	181 Pkt
1836273920	14.25 Volt	950 Pkt	69 Pcnt	164 Pkt
1774105637	14.25 Volt	780 Pkt	62 Pcnt	120 Pkt
1774105337	14.25 Volt	770 Pkt	62 Pcnt	101 Pkt
1774105037	14.25 Volt	790 Pkt	62 Pcnt	112 Pkt
1774104737	14.25 Volt	790 Pkt	63 Pcnt	109 Pkt
1774104437	14.25 Volt	800 Pkt	64 Pcnt	112 Pkt
1774104137	14.25 Volt	800 Pkt	63 Pcnt	125 Pkt
1774103838	14.25 Volt	790 Pkt	63 Pcnt	129 Pkt
1774103537	14.25 Volt	790 Pkt	63 Pcnt	104 Pkt
1774103237	14.25 Volt	810 Pkt	63 Pcnt	115 Pkt
1774102937	14.25 Volt	820 Pkt	64 Pcnt	129 Pkt
1774102637	14.25 Volt	820 Pkt	64 Pcnt	143 Pkt
1774102338	14.25 Volt	810 Pkt	64 Pcnt	136 Pkt
1774102037	14.25 Volt	800 Pkt	64 Pcnt	131 Pkt
1774101738	14.25 Volt	800 Pkt	63 Pcnt	119 Pkt
1774101438	14.25 Volt	810 Pkt	63 Pcnt	131 Pkt
1774101137	14.25 Volt	820 Pkt	62 Pcnt	118 Pkt
1774100838	14.25 Volt	830 Pkt	62 Pcnt	100 Pkt
1774100537	14.25 Volt	840 Pkt	62 Pcnt	121 Pkt
1774100238	14.25 Volt	840 Pkt	61 Pcnt	141 Pkt
1774099938	14.25 Volt	830 Pkt	60 Pcnt	136 Pkt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Rx10m: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)