This is the latest recevied telemetry packets stored in our database for station/object HS5TQA-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | HUM* | BAR* | BAT* | SAT* |
|---|---|---|---|---|---|
| 1779711891 | 3991 °C | 394 %RH | 2067 hPa | 332 V | 21 |
| 1779711891 | 3991 °C | 394 %RH | 2067 hPa | 332 V | 21 |
| 1779711254 | 3984 °C | 393 %RH | 2063 hPa | 337 V | 20 |
| 1779710617 | 3963 °C | 389 %RH | 2061 hPa | 342 V | 19 |
| 1779709976 | 3945 °C | 390 %RH | 2061 hPa | 344 V | 20 |
| 1779709339 | 3968 °C | 386 %RH | 2057 hPa | 346 V | 20 |
| 1779708702 | 3981 °C | 383 %RH | 2057 hPa | 348 V | 21 |
| 1779708061 | 4002 °C | 384 %RH | 2054 hPa | 350 V | 20 |
| 1779707424 | 4043 °C | 382 %RH | 2053 hPa | 352 V | 22 |
| 1779706787 | 4065 °C | 378 %RH | 2052 hPa | 354 V | 21 |
| 1779706146 | 4108 °C | 372 %RH | 2051 hPa | 356 V | 20 |
| 1779705509 | 4204 °C | 357 %RH | 2048 hPa | 358 V | 19 |
| 1779704869 | 4231 °C | 353 %RH | 2045 hPa | 360 V | 19 |
| 1779704257 | 4238 °C | 355 %RH | 2044 hPa | 361 V | 20 |
| 1779704257 | 4238 °C | 355 %RH | 2044 hPa | 361 V | 20 |
| 1779704257 | 4238 °C | 355 %RH | 2044 hPa | 361 V | 20 |
| 1779703620 | 4252 °C | 350 %RH | 2042 hPa | 364 V | 20 |
| 1779702979 | 4254 °C | 350 %RH | 2041 hPa | 367 V | 19 |
| 1779702342 | 4256 °C | 356 %RH | 2038 hPa | 369 V | 24 |
| 1779702342 | 4256 °C | 356 %RH | 2038 hPa | 369 V | 24 |
| 1779701705 | 4249 °C | 356 %RH | 2036 hPa | 372 V | 22 |
| 1779701064 | 4249 °C | 353 %RH | 2035 hPa | 374 V | 22 |
| 1779700427 | 4250 °C | 351 %RH | 2037 hPa | 374 V | 21 |
| 1779699790 | 4245 °C | 349 %RH | 2041 hPa | 377 V | 19 |
| 1779699149 | 4227 °C | 351 %RH | 2042 hPa | 379 V | 21 |
*Used Equation Coefficients:
TEMP: 0, 1, 0
HUM: 0, 1, 0
BAR: 0, 1, 0
BAT: 0, 1, 0
SAT: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)