This is the latest recevied telemetry packets stored in our database for station/object SQ9JYT-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1786727549 | 0 Count | 172 Count | 0 Count | 0 VDC | 0 VDC |
| 1786725749 | 0 Count | 169 Count | 0 Count | 0 VDC | 0 VDC |
| 1786723949 | 0 Count | 166 Count | 0 Count | 0 VDC | 0 VDC |
| 1786722149 | 0 Count | 164 Count | 0 Count | 0 VDC | 0 VDC |
| 1786720349 | 0 Count | 157 Count | 0 Count | 0 VDC | 0 VDC |
| 1786718549 | 0 Count | 151 Count | 0 Count | 0 VDC | 0 VDC |
| 1786716748 | 0 Count | 140 Count | 0 Count | 0 VDC | 0 VDC |
| 1786693350 | 0 Count | 131 Count | 0 Count | 0 VDC | 0 VDC |
| 1786691550 | 0 Count | 130 Count | 0 Count | 0 VDC | 0 VDC |
| 1786689750 | 0 Count | 126 Count | 0 Count | 0 VDC | 0 VDC |
| 1786687950 | 0 Count | 126 Count | 0 Count | 0 VDC | 0 VDC |
| 1786686150 | 0 Count | 114 Count | 0 Count | 0 VDC | 0 VDC |
| 1786684350 | 0 Count | 113 Count | 0 Count | 0 VDC | 0 VDC |
| 1786682550 | 0 Count | 113 Count | 0 Count | 0 VDC | 0 VDC |
| 1786680750 | 0 Count | 113 Count | 0 Count | 0 VDC | 0 VDC |
| 1786678950 | 0 Count | 113 Count | 0 Count | 0 VDC | 0 VDC |
| 1786677149 | 0 Count | 113 Count | 0 Count | 0 VDC | 0 VDC |
| 1786675348 | 0 Count | 113 Count | 0 Count | 0 VDC | 0 VDC |
| 1786673547 | 0 Count | 113 Count | 0 Count | 0 VDC | 0 VDC |
| 1786671746 | 0 Count | 113 Count | 0 Count | 0 VDC | 0 VDC |
| 1786669946 | 0 Count | 113 Count | 0 Count | 0 VDC | 0 VDC |
| 1786668146 | 0 Count | 113 Count | 0 Count | 0 VDC | 0 VDC |
| 1786666346 | 0 Count | 113 Count | 0 Count | 0 VDC | 0 VDC |
| 1786664546 | 0 Count | 113 Count | 0 Count | 0 VDC | 0 VDC |
| 1786662746 | 0 Count | 113 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)