This is the latest recevied telemetry packets stored in our database for station/object IZ3ARR-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vbat* | RSSI* | Uptime* | Sat* | Rsvd* |
|---|---|---|---|---|---|
| 1779780188 | 4101 mV | -44 dBm | 3680 min | 0 n | 0 |
| 1779779588 | 4102 mV | -45 dBm | 3670 min | 0 n | 0 |
| 1779778987 | 4099 mV | -45 dBm | 3660 min | 0 n | 0 |
| 1779778387 | 4107 mV | -45 dBm | 3650 min | 0 n | 0 |
| 1779777787 | 4091 mV | -44 dBm | 3640 min | 0 n | 0 |
| 1779777187 | 4101 mV | -44 dBm | 3630 min | 0 n | 0 |
| 1779776588 | 4104 mV | -45 dBm | 3620 min | 0 n | 0 |
| 1779775986 | 4102 mV | -42 dBm | 3610 min | 0 n | 0 |
| 1779775387 | 4091 mV | -43 dBm | 3600 min | 0 n | 0 |
| 1779774786 | 4108 mV | -44 dBm | 3590 min | 0 n | 0 |
| 1779774187 | 4107 mV | -42 dBm | 3580 min | 0 n | 0 |
| 1779773586 | 4107 mV | -43 dBm | 3570 min | 0 n | 0 |
| 1779772987 | 4106 mV | -42 dBm | 3560 min | 0 n | 0 |
| 1779772386 | 4099 mV | -42 dBm | 3550 min | 0 n | 0 |
| 1779771786 | 4101 mV | -42 dBm | 3540 min | 0 n | 0 |
| 1779771185 | 4088 mV | -42 dBm | 3530 min | 0 n | 0 |
| 1779770587 | 4100 mV | -43 dBm | 3520 min | 0 n | 0 |
| 1779769986 | 4107 mV | -43 dBm | 3510 min | 0 n | 0 |
| 1779769385 | 4111 mV | -45 dBm | 3500 min | 0 n | 0 |
| 1779768785 | 4105 mV | -44 dBm | 3490 min | 0 n | 0 |
| 1779768185 | 4111 mV | -43 dBm | 3480 min | 0 n | 0 |
| 1779767585 | 4093 mV | -42 dBm | 3470 min | 0 n | 0 |
| 1779766985 | 4108 mV | -44 dBm | 3460 min | 0 n | 0 |
| 1779766385 | 4103 mV | -44 dBm | 3450 min | 0 n | 0 |
| 1779765785 | 4102 mV | -45 dBm | 3440 min | 0 n | 0 |
*Used Equation Coefficients:
Vbat: 0, 1, 0
RSSI: 0, 1, -100
Uptime: 0, 1, 0
Sat: 0, 1, 0
Rsvd: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)