APRS Track Direct

My position About ☰

reset

DB5RRH-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB5RRH-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1732429483	13.88 Volt	150 Pkt	10 Pkt	88 Pcnt	12.5 C
1732429183	13.88 Volt	150 Pkt	10 Pkt	88 Pcnt	12.5 C
1732428883	13.88 Volt	150 Pkt	10 Pkt	88 Pcnt	12.5 C
1732428583	13.88 Volt	150 Pkt	10 Pkt	88 Pcnt	12.5 C
1732428283	13.88 Volt	150 Pkt	10 Pkt	88 Pcnt	12.5 C
1732427983	13.88 Volt	150 Pkt	10 Pkt	89 Pcnt	12.5 C
1732427683	13.88 Volt	150 Pkt	10 Pkt	88 Pcnt	12.5 C
1732427383	13.88 Volt	150 Pkt	10 Pkt	89 Pcnt	12.5 C
1732427083	13.88 Volt	160 Pkt	10 Pkt	91 Pcnt	12.5 C
1732426783	13.88 Volt	160 Pkt	10 Pkt	92 Pcnt	12.5 C
1732426483	13.88 Volt	160 Pkt	10 Pkt	92 Pcnt	12.5 C
1732426183	13.88 Volt	160 Pkt	10 Pkt	93 Pcnt	12.5 C
1732425883	13.88 Volt	160 Pkt	10 Pkt	93 Pcnt	12 C
1732425583	13.88 Volt	160 Pkt	10 Pkt	93 Pcnt	12 C
1732425283	13.88 Volt	160 Pkt	10 Pkt	93 Pcnt	12 C
1732424983	13.88 Volt	160 Pkt	10 Pkt	94 Pcnt	12 C
1732424683	13.88 Volt	160 Pkt	10 Pkt	95 Pcnt	12 C
1732424383	13.88 Volt	160 Pkt	10 Pkt	95 Pcnt	12 C
1732424083	13.88 Volt	160 Pkt	10 Pkt	96 Pcnt	12 C
1732423783	13.88 Volt	170 Pkt	10 Pkt	96 Pcnt	12 C
1732423483	13.88 Volt	170 Pkt	10 Pkt	96 Pcnt	12 C
1732423183	13.88 Volt	160 Pkt	10 Pkt	95 Pcnt	12 C
1732422883	13.88 Volt	170 Pkt	10 Pkt	94 Pcnt	12 C
1732422584	13.88 Volt	160 Pkt	10 Pkt	93 Pcnt	12 C
1732422283	13.88 Volt	170 Pkt	10 Pkt	95 Pcnt	12 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)