This is the latest recevied telemetry packets stored in our database for station/object DG2EBN-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762276152 | 20.9 deg C | 51.9 % | 1019 hPa | 0 | 0 |
| 1762273118 | 22.2 deg C | 49.7 % | 1018.1 hPa | 0 | 0 |
| 1762272193 | 22.6 deg C | 48.9 % | 1018.9 hPa | 0 | 0 |
| 1762271292 | 21.8 deg C | 51.4 % | 1018.3 hPa | 0 | 0 |
| 1762270394 | 21.1 deg C | 53.6 % | 1017.6 hPa | 0 | 0 |
| 1762268421 | 23.8 deg C | 47.2 % | 1018.9 hPa | 0 | 0 |
| 1762267518 | 23.7 deg C | 48 % | 1019.1 hPa | 0 | 0 |
| 1762266615 | 22.8 deg C | 50.7 % | 1019.3 hPa | 0 | 0 |
| 1762254342 | 26.1 deg C | 50.4 % | 1021.4 hPa | 0 | 0 |
| 1762248129 | 19.5 deg C | 60.1 % | 1022.1 hPa | 0 | 0 |
| 1762247233 | 18.7 deg C | 65.5 % | 1023.5 hPa | 0 | 0 |
| 1762244207 | 19.5 deg C | 61.3 % | 1023 hPa | 0 | 0 |
| 1762243302 | 19.3 deg C | 61.2 % | 1022.9 hPa | 0 | 0 |
| 1762242399 | 19.2 deg C | 61 % | 1022.1 hPa | 0 | 0 |
| 1762241500 | 19.2 deg C | 60.7 % | 1021.1 hPa | 0 | 0 |
| 1762240603 | 19.3 deg C | 60 % | 1020.1 hPa | 0 | 0 |
| 1762239705 | 19.6 deg C | 59.1 % | 1021.2 hPa | 0 | 0 |
| 1762238797 | 20.2 deg C | 57.8 % | 1021.9 hPa | 0 | 0 |
| 1762237902 | 21.1 deg C | 56.9 % | 1022.2 hPa | 0 | 0 |
| 1762237003 | 19.9 deg C | 59.9 % | 1021.2 hPa | 0 | 0 |
| 1762236102 | 15.3 deg C | 73.1 % | 1021.5 hPa | 0 | 0 |
| 1762235906 | 14.1 deg C | 66.8 % | 1021 hPa | 0 | 0 |
| 1762235005 | 13.7 deg C | 66.2 % | 1021.7 hPa | 0 | 0 |
| 1762234108 | 13.1 deg C | 68.1 % | 1021.8 hPa | 0 | 0 |
| 1762233205 | 12.6 deg C | 69.6 % | 1021.5 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)