APRS Track Direct

My position About ☰

reset

WI1U-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WI1U-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1779824147	0 Pkts	0 Pkts	0 Pkts	25 C
1779820550	0 Pkts	0 Pkts	0 Pkts	24 C
1779816947	0 Pkts	0 Pkts	0 Pkts	25 C
1779813349	0 Pkts	0 Pkts	0 Pkts	25 C
1779809747	0 Pkts	0 Pkts	0 Pkts	24 C
1779806149	1 Pkts	1 Pkts	1 Pkts	24 C
1779802549	38 Pkts	36 Pkts	6 Pkts	23 C
1779798949	158 Pkts	155 Pkts	29 Pkts	23 C
1779795350	231 Pkts	222 Pkts	52 Pkts	23 C
1779791749	141 Pkts	138 Pkts	36 Pkts	23 C
1779788149	106 Pkts	102 Pkts	25 Pkts	23 C
1779784547	196 Pkts	192 Pkts	42 Pkts	23 C
1779780949	226 Pkts	222 Pkts	55 Pkts	24 C
1779777347	213 Pkts	206 Pkts	46 Pkts	24 C
1779773748	191 Pkts	186 Pkts	50 Pkts	24 C
1779770147	212 Pkts	204 Pkts	44 Pkts	24 C
1779766548	243 Pkts	237 Pkts	47 Pkts	24 C
1779762948	195 Pkts	194 Pkts	48 Pkts	24 C
1779759350	0 Pkts	0 Pkts	0 Pkts	25 C
1779755750	0 Pkts	0 Pkts	0 Pkts	24 C
1779752148	0 Pkts	0 Pkts	0 Pkts	24 C
1779748549	0 Pkts	0 Pkts	0 Pkts	25 C
1779744948	0 Pkts	0 Pkts	0 Pkts	24 C
1779741349	0 Pkts	0 Pkts	0 Pkts	24 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)