APRS Track Direct

My position About ☰

reset

WC4PEM-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WC4PEM-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Vin*	Dg1h*	Rx1h*	Eff1h*
1786721632	23 C	4.65 Volt	290 Pkt	1130 Pkt	69 Pcnt
1786721632	23 C	4.65 Volt	290 Pkt	1130 Pkt	69 Pcnt
1786721332	24.5 C	4.73 Volt	290 Pkt	1120 Pkt	68 Pcnt
1786721033	24.5 C	4.73 Volt	280 Pkt	1090 Pkt	68 Pcnt
1786721032	24.5 C	4.73 Volt	280 Pkt	1090 Pkt	68 Pcnt
1786720732	22 C	4.65 Volt	280 Pkt	1080 Pkt	68 Pcnt
1786720432	23 C	4.65 Volt	280 Pkt	1070 Pkt	68 Pcnt
1786720432	23 C	4.65 Volt	280 Pkt	1070 Pkt	68 Pcnt
1786720132	24 C	4.65 Volt	280 Pkt	1050 Pkt	68 Pcnt
1786719833	25.5 C	4.73 Volt	280 Pkt	1070 Pkt	68 Pcnt
1786719832	25.5 C	4.73 Volt	280 Pkt	1070 Pkt	68 Pcnt
1786719532	24.5 C	4.65 Volt	280 Pkt	1100 Pkt	69 Pcnt
1786719232	22 C	4.65 Volt	280 Pkt	1090 Pkt	68 Pcnt
1786719232	22 C	4.65 Volt	280 Pkt	1090 Pkt	68 Pcnt
1786718932	23 C	4.65 Volt	280 Pkt	1110 Pkt	68 Pcnt
1786718634	24 C	4.73 Volt	290 Pkt	1130 Pkt	68 Pcnt
1786718632	24 C	4.73 Volt	290 Pkt	1130 Pkt	68 Pcnt
1786718332	26 C	4.65 Volt	290 Pkt	1140 Pkt	68 Pcnt
1786718033	24.5 C	4.73 Volt	300 Pkt	1160 Pkt	68 Pcnt
1786718032	24.5 C	4.73 Volt	300 Pkt	1160 Pkt	68 Pcnt
1786717732	22 C	4.65 Volt	310 Pkt	1200 Pkt	69 Pcnt
1786717435	23 C	4.73 Volt	320 Pkt	1220 Pkt	68 Pcnt
1786717432	23 C	4.73 Volt	320 Pkt	1220 Pkt	68 Pcnt
1786717132	24 C	4.65 Volt	320 Pkt	1240 Pkt	68 Pcnt
1786716832	26 C	4.58 Volt	320 Pkt	1270 Pkt	68 Pcnt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

Vin: 0, 0.075, 0

Dg1h: 0, 10, 0

Rx1h: 0, 10, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)