APRS Track Direct

My position About ☰

reset

E24SAT-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E24SAT-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1732296103	0 Pkt	0 Pkt	-88 dBm	12.84 V
1732294879	0 Pkt	0 Pkt	-90 dBm	12.82 V
1732293654	0 Pkt	0 Pkt	-88 dBm	12.82 V
1732292430	0 Pkt	0 Pkt	-92 dBm	12.84 V
1732291206	0 Pkt	0 Pkt	-91 dBm	12.84 V
1732289981	0 Pkt	0 Pkt	-88 dBm	12.82 V
1732288757	0 Pkt	0 Pkt	-88 dBm	12.84 V
1732287536	0 Pkt	0 Pkt	-91 dBm	12.84 V
1732286333	0 Pkt	0 Pkt	-87 dBm	12.84 V
1732285084	0 Pkt	0 Pkt	-87 dBm	12.84 V
1732283969	0 Pkt	0 Pkt	-89 dBm	12.82 V
1732282635	0 Pkt	0 Pkt	-90 dBm	12.86 V
1732281410	0 Pkt	0 Pkt	-90 dBm	12.82 V
1732280186	0 Pkt	0 Pkt	-90 dBm	12.84 V
1732278966	0 Pkt	0 Pkt	-88 dBm	12.82 V
1732277737	0 Pkt	0 Pkt	-89 dBm	12.84 V
1732276525	0 Pkt	0 Pkt	-92 dBm	12.82 V
1732274065	5 Pkt	0 Pkt	-91 dBm	12.74 V
1732272839	0 Pkt	0 Pkt	-90 dBm	12.84 V
1732271615	0 Pkt	1 Pkt	-90 dBm	12.84 V
1732270390	0 Pkt	0 Pkt	-90 dBm	12.82 V
1732269166	0 Pkt	0 Pkt	-90 dBm	12.84 V
1732267941	0 Pkt	0 Pkt	-91 dBm	12.86 V
1732266717	0 Pkt	0 Pkt	-92 dBm	12.86 V
1732265492	0 Pkt	2 Pkt	-90 dBm	12.84 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)