APRS Track Direct

My position About ☰

reset

9A7KXP-6 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9A7KXP-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Temp*
1790645763	13.13 Volt	1600 Pkt	62 Pcnt	8 C
1790645762	13.13 Volt	1600 Pkt	62 Pcnt	8 C
1790645462	13.13 Volt	1600 Pkt	62 Pcnt	8 C
1790645162	13.13 Volt	1590 Pkt	62 Pcnt	7.5 C
1790644864	13.13 Volt	1600 Pkt	62 Pcnt	7.5 C
1790644862	13.13 Volt	1600 Pkt	62 Pcnt	7.5 C
1790644562	13.13 Volt	1610 Pkt	63 Pcnt	7.5 C
1790644262	13.13 Volt	1630 Pkt	63 Pcnt	7.5 C
1790643964	13.13 Volt	1600 Pkt	62 Pcnt	8 C
1790643962	13.13 Volt	1600 Pkt	62 Pcnt	8 C
1790643662	13.13 Volt	1590 Pkt	61 Pcnt	7.5 C
1790643362	13.13 Volt	1590 Pkt	61 Pcnt	7.5 C
1790643063	13.13 Volt	1590 Pkt	61 Pcnt	7.5 C
1790643062	13.13 Volt	1590 Pkt	61 Pcnt	7.5 C
1790642762	13.13 Volt	1610 Pkt	62 Pcnt	7.5 C
1790642462	13.13 Volt	1630 Pkt	62 Pcnt	7.5 C
1790642163	13.13 Volt	1660 Pkt	63 Pcnt	7.5 C
1790642162	13.13 Volt	1660 Pkt	63 Pcnt	7.5 C
1790641862	13.13 Volt	1670 Pkt	63 Pcnt	7.5 C
1790641562	13.13 Volt	1690 Pkt	63 Pcnt	7.5 C
1790641263	13.13 Volt	1700 Pkt	62 Pcnt	7.5 C
1790641262	13.13 Volt	1700 Pkt	62 Pcnt	7.5 C
1790640962	13.13 Volt	1710 Pkt	62 Pcnt	8 C
1790640662	13.13 Volt	1690 Pkt	62 Pcnt	8 C
1790640364	13.13 Volt	1700 Pkt	62 Pcnt	8 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)