APRS Track Direct

My position About ☰

reset

WA2NDV-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WA2NDV-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	RFIn*	RFiGate*	DigiRpt*	InetIn*
1774120680	353 Pkts	274 Pkts	90 Pkts	69 Pkts
1774117080	284 Pkts	214 Pkts	48 Pkts	79 Pkts
1774113480	334 Pkts	179 Pkts	45 Pkts	69 Pkts
1774109880	462 Pkts	284 Pkts	119 Pkts	88 Pkts
1774106280	141 Pkts	120 Pkts	39 Pkts	90 Pkts
1774102680	142 Pkts	135 Pkts	47 Pkts	83 Pkts
1774099080	188 Pkts	173 Pkts	56 Pkts	165 Pkts
1774095480	210 Pkts	198 Pkts	84 Pkts	317 Pkts
1774091880	184 Pkts	170 Pkts	58 Pkts	121 Pkts
1774088280	155 Pkts	141 Pkts	47 Pkts	89 Pkts
1774084680	134 Pkts	125 Pkts	39 Pkts	157 Pkts
1774081080	135 Pkts	125 Pkts	46 Pkts	292 Pkts
1774077480	109 Pkts	97 Pkts	33 Pkts	93 Pkts
1774073880	171 Pkts	151 Pkts	63 Pkts	95 Pkts
1774070280	163 Pkts	143 Pkts	70 Pkts	109 Pkts
1774066680	125 Pkts	115 Pkts	39 Pkts	88 Pkts
1774063080	106 Pkts	98 Pkts	21 Pkts	70 Pkts
1774059480	103 Pkts	96 Pkts	36 Pkts	79 Pkts
1774055880	113 Pkts	109 Pkts	31 Pkts	68 Pkts
1774052280	72 Pkts	67 Pkts	18 Pkts	74 Pkts
1774048680	65 Pkts	61 Pkts	19 Pkts	64 Pkts
1774045080	101 Pkts	98 Pkts	37 Pkts	70 Pkts
1774041480	119 Pkts	112 Pkts	43 Pkts	83 Pkts

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

InetiGate: 0, 1, 0

InetIn: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)