This is the latest recevied telemetry packets stored in our database for station/object OE6POD-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1758198325 | 947.5 hPa | 21.2 C deg | 0 % | 1025 hPa | 0 C deg |
| 1758196509 | 947.6 hPa | 18.2 C deg | 0 % | 1025.9 hPa | 0 C deg |
| 1758194691 | 947.9 hPa | 18.7 C deg | 0 % | 1026.1 hPa | 0 C deg |
| 1758192878 | 948.2 hPa | 20.5 C deg | 0 % | 1025.9 hPa | 0 C deg |
| 1758191061 | 948.5 hPa | 20.7 C deg | 0 % | 1026.2 hPa | 0 C deg |
| 1758189250 | 948.8 hPa | 22.5 C deg | 0 % | 1026 hPa | 0 C deg |
| 1758187427 | 948.9 hPa | 21.6 C deg | 0 % | 1026.4 hPa | 0 C deg |
| 1758185612 | 949.1 hPa | 25.5 C deg | 0 % | 1025.6 hPa | 0 C deg |
| 1758183797 | 949.2 hPa | 28.5 C deg | 0 % | 1024.9 hPa | 0 C deg |
| 1758181982 | 949 hPa | 27 C deg | 0 % | 1025.1 hPa | 0 C deg |
| 1758180167 | 949 hPa | 25.5 C deg | 0 % | 1025.4 hPa | 0 C deg |
| 1758178352 | 948.9 hPa | 23.9 C deg | 0 % | 1025.8 hPa | 0 C deg |
| 1758176537 | 949 hPa | 18.6 C deg | 0 % | 1027.4 hPa | 0 C deg |
| 1758175284 | 948.6 hPa | 5.4 C deg | 0 % | 1030.9 hPa | 0 C deg |
| 1758175106 | 948.7 hPa | 4.7 C deg | 0 % | 1031.1 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)