This is the latest recevied telemetry packets stored in our database for station/object DO3MLA-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786753669 | 4.07 VDC | 2.4 VDC | 0 | 0 | 0 |
| 1786752769 | 4.06 VDC | 2.42 VDC | 0 | 0 | 0 |
| 1786751869 | 4.06 VDC | 2.42 VDC | 0 | 0 | 0 |
| 1786750969 | 4.14 VDC | 2.42 VDC | 0 | 0 | 0 |
| 1786750069 | 4.07 VDC | 2.42 VDC | 0 | 0 | 0 |
| 1786749169 | 4.07 VDC | 2.42 VDC | 0 | 0 | 0 |
| 1786748269 | 4.21 VDC | 2.42 VDC | 0 | 0 | 0 |
| 1786747370 | 4.07 VDC | 2.44 VDC | 0 | 0 | 0 |
| 1786746470 | 4.04 VDC | 2.42 VDC | 0 | 0 | 0 |
| 1786745570 | 4.07 VDC | 2.44 VDC | 0 | 0 | 0 |
| 1786744670 | 4.04 VDC | 2.42 VDC | 0 | 0 | 0 |
| 1786743770 | 4.06 VDC | 2.44 VDC | 0 | 0 | 0 |
| 1786742869 | 4.07 VDC | 2.44 VDC | 0 | 0 | 0 |
| 1786741969 | 4.06 VDC | 2.44 VDC | 0 | 0 | 0 |
| 1786741069 | 4.06 VDC | 2.46 VDC | 0 | 0 | 0 |
| 1786740169 | 4.07 VDC | 2.46 VDC | 0 | 0 | 0 |
| 1786739269 | 4.07 VDC | 2.46 VDC | 0 | 0 | 0 |
| 1786738369 | 4.06 VDC | 2.46 VDC | 0 | 0 | 0 |
| 1786737469 | 4.07 VDC | 2.46 VDC | 0 | 0 | 0 |
| 1786736569 | 4.07 VDC | 2.48 VDC | 0 | 0 | 0 |
| 1786735669 | 4.07 VDC | 2.48 VDC | 0 | 0 | 0 |
| 1786734769 | 4.04 VDC | 2.48 VDC | 0 | 0 | 0 |
| 1786733869 | 4.07 VDC | 2.5 VDC | 0 | 0 | 0 |
| 1786732968 | 4.07 VDC | 2.52 VDC | 0 | 0 | 0 |
| 1786732068 | 4.07 VDC | 2.6 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)