APRS Track Direct

☰

reset

BX6AP-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BX6AP-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Temp*	Humid*	Light*	Uptime*
1792150802	26.2 degC	84 %	0 100lx	708 min
1792150502	26.2 degC	84 %	0 100lx	703 min
1792150204	26.3 degC	83 %	0 100lx	698 min
1792149902	26.3 degC	83 %	0 100lx	693 min
1792149602	26.4 degC	83 %	0 100lx	688 min
1792149302	26.4 degC	82 %	0 100lx	683 min
1792149002	26.4 degC	82 %	0 100lx	678 min
1792148702	26.5 degC	82 %	0 100lx	673 min
1792148402	26.5 degC	82 %	0 100lx	668 min
1792148102	26.5 degC	81 %	0 100lx	663 min
1792147802	26.5 degC	81 %	0 100lx	658 min
1792147502	26.6 degC	80 %	0 100lx	653 min
1792147203	26.6 degC	80 %	0 100lx	648 min
1792146903	26.7 degC	80 %	0 100lx	643 min
1792146604	26.7 degC	79 %	0 100lx	638 min
1792146302	26.8 degC	79 %	0 100lx	633 min
1792146002	26.8 degC	78 %	0 100lx	628 min
1792145703	27 degC	78 %	0 100lx	623 min
1792145402	27 degC	77 %	0 100lx	618 min
1792145102	27 degC	76 %	0 100lx	613 min
1792144802	27.1 degC	75 %	0 100lx	608 min
1792144502	27 degC	74 %	0 100lx	603 min
1792144202	27.1 degC	73 %	0 100lx	598 min
1792143902	27.4 degC	72 %	1 100lx	593 min
1792143602	27.4 degC	71 %	2 100lx	588 min

*Used Equation Coefficients:

Temp: 0, 0.1, 0

Humid: 0, 1, 0

Light: 0, 1, 0

Gust: 0, 1, 0

Uptime: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)

Maintained by UW0WU-1, based on APRS Track Direct