APRS Track Direct

My position About ☰

reset

DB0SWR-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0SWR-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Temp*	RPkt/h*	DPkt/h*
1786722080	12.83 Volt	32 DegC	480 Stk.	28952 Stk.
1786721780	12.83 Volt	32 DegC	490 Stk.	28658 Stk.
1786721480	12.83 Volt	32 DegC	480 Stk.	28041 Stk.
1786721180	12.83 Volt	32 DegC	490 Stk.	27125 Stk.
1786720880	12.83 Volt	31.5 DegC	480 Stk.	26763 Stk.
1786720580	12.83 Volt	31.5 DegC	470 Stk.	26513 Stk.
1786720280	12.83 Volt	31.5 DegC	480 Stk.	26666 Stk.
1786719980	12.83 Volt	31.5 DegC	500 Stk.	26838 Stk.
1786719680	12.83 Volt	31.5 DegC	500 Stk.	26984 Stk.
1786719380	12.83 Volt	31.5 DegC	500 Stk.	26824 Stk.
1786719080	12.83 Volt	31.5 DegC	510 Stk.	28015 Stk.
1786718780	12.83 Volt	31.5 DegC	530 Stk.	29190 Stk.
1786718480	12.83 Volt	31.5 DegC	530 Stk.	29050 Stk.
1786718180	12.83 Volt	31.5 DegC	550 Stk.	29764 Stk.
1786717880	12.83 Volt	31.5 DegC	560 Stk.	29609 Stk.
1786717580	12.83 Volt	31.5 DegC	580 Stk.	30136 Stk.
1786717280	12.83 Volt	31.5 DegC	590 Stk.	29610 Stk.
1786716980	12.83 Volt	31.5 DegC	590 Stk.	29530 Stk.
1786716680	12.83 Volt	31.5 DegC	600 Stk.	29353 Stk.
1786716380	12.83 Volt	31.5 DegC	600 Stk.	30247 Stk.
1786716080	12.83 Volt	31.5 DegC	600 Stk.	29421 Stk.
1786715780	12.83 Volt	31.5 DegC	620 Stk.	30016 Stk.
1786715480	12.83 Volt	31.5 DegC	610 Stk.	29153 Stk.
1786715180	12.83 Volt	31.5 DegC	590 Stk.	29222 Stk.
1786714880	12.83 Volt	31.5 DegC	590 Stk.	27973 Stk.

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Temp: 0, 0.5, -64

RPkt/h: 0, 10, 0

DPkt/h: 0, 1, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)