This is the latest recevied telemetry packets stored in our database for station/object YH8VA-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
|---|---|---|---|---|---|
| 1753848353 | 0 Pkt | 0 Pkt | 0 Pkt | -56 dBm | 0 % |
| 1753848032 | 0 Pkt | 0 Pkt | 0 Pkt | -56 dBm | 0 % |
| 1753847709 | 0 Pkt | 0 Pkt | 0 Pkt | -55 dBm | 0 % |
| 1753847387 | 0 Pkt | 0 Pkt | 0 Pkt | -51 dBm | 0 % |
| 1753847065 | 0 Pkt | 0 Pkt | 0 Pkt | -52 dBm | 0 % |
| 1753846743 | 0 Pkt | 0 Pkt | 0 Pkt | -52 dBm | 0 % |
| 1753846421 | 0 Pkt | 0 Pkt | 0 Pkt | -53 dBm | 0 % |
| 1753846100 | 0 Pkt | 0 Pkt | 0 Pkt | -54 dBm | 0 % |
| 1753845777 | 0 Pkt | 0 Pkt | 0 Pkt | -55 dBm | 0 % |
| 1753845455 | 0 Pkt | 0 Pkt | 0 Pkt | -59 dBm | 0 % |
| 1753845133 | 0 Pkt | 1 Pkt | 0 Pkt | -51 dBm | 0 % |
| 1753844811 | 0 Pkt | 0 Pkt | 0 Pkt | -53 dBm | 0 % |
| 1753844490 | 0 Pkt | 0 Pkt | 0 Pkt | -54 dBm | 0 % |
| 1753844167 | 0 Pkt | 0 Pkt | 0 Pkt | -51 dBm | 0 % |
| 1753843846 | 0 Pkt | 0 Pkt | 0 Pkt | -54 dBm | 0 % |
| 1753843524 | 0 Pkt | 0 Pkt | 0 Pkt | -52 dBm | 0 % |
| 1753843201 | 0 Pkt | 0 Pkt | 0 Pkt | -52 dBm | 0 % |
| 1753842880 | 0 Pkt | 0 Pkt | 0 Pkt | -50 dBm | 0 % |
| 1753842557 | 0 Pkt | 0 Pkt | 0 Pkt | -53 dBm | 0 % |
| 1753842236 | 0 Pkt | 0 Pkt | 0 Pkt | -54 dBm | 0 % |
| 1753841914 | 0 Pkt | 0 Pkt | 0 Pkt | -53 dBm | 0 % |
| 1753841592 | 0 Pkt | 0 Pkt | 0 Pkt | -51 dBm | 0 % |
| 1753841270 | 0 Pkt | 0 Pkt | 0 Pkt | -53 dBm | 0 % |
| 1753840948 | 0 Pkt | 0 Pkt | 0 Pkt | -54 dBm | 0 % |
| 1753840626 | 0 Pkt | 0 Pkt | 0 Pkt | -53 dBm | 0 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)