APRS Track Direct

My position About ☰

reset

HS5SQI-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS5SQI-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1836274370	0 Pkt	0 Pkt	-73 dBm	15.22 V
1836274242	0 Pkt	0 Pkt	-74 dBm	13.06 V
1762262879	6 Pkt	0 Pkt	-80 dBm	13.39 V
1762262255	9 Pkt	1 Pkt	-79 dBm	13.06 V
1762261632	2 Pkt	0 Pkt	-74 dBm	13.78 V
1762261076	17 Pkt	1 Pkt	-72 dBm	14.6 V
1762260451	17 Pkt	0 Pkt	-75 dBm	14.23 V
1762259826	7 Pkt	0 Pkt	-75 dBm	13.9 V
1762259203	6 Pkt	0 Pkt	-75 dBm	13.23 V
1762258580	5 Pkt	0 Pkt	-71 dBm	14.17 V
1762257957	8 Pkt	0 Pkt	-70 dBm	14.77 V
1762257333	18 Pkt	0 Pkt	-73 dBm	14.66 V
1762256708	4 Pkt	1 Pkt	-73 dBm	13.19 V
1762256086	6 Pkt	0 Pkt	-71 dBm	14.79 V
1762255463	9 Pkt	0 Pkt	-69 dBm	15.2 V
1762254838	11 Pkt	0 Pkt	-73 dBm	13.41 V
1762254213	6 Pkt	0 Pkt	-72 dBm	13.64 V
1762253590	4 Pkt	0 Pkt	-72 dBm	15.44 V
1762252966	34 Pkt	0 Pkt	-71 dBm	14.89 V
1762252341	6 Pkt	0 Pkt	-72 dBm	13.15 V
1762251820	27 Pkt	0 Pkt	-74 dBm	14.6 V
1762251191	20 Pkt	0 Pkt	-73 dBm	14.38 V
1762250565	23 Pkt	1 Pkt	-74 dBm	13.97 V
1762249936	30 Pkt	0 Pkt	-75 dBm	15.01 V
1762249308	12 Pkt	0 Pkt	-74 dBm	14.23 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)