This is the latest recevied telemetry packets stored in our database for station/object LZ1RZZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Outside Temperature* | Air Humidity* | Atmospheric pressure* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1744831802 | 18.7 Deg.C | 100 Percent | 1003 hPa | 0 | 0 |
| 1744831502 | 18.6 Deg.C | 100 Percent | 1003 hPa | 0 | 0 |
| 1744831202 | 18.6 Deg.C | 98 Percent | 1003 hPa | 0 | 0 |
| 1744830903 | 18.3 Deg.C | 100 Percent | 1002 hPa | 0 | 0 |
| 1744830602 | 18.5 Deg.C | 100 Percent | 1003 hPa | 0 | 0 |
| 1744830302 | 18.2 Deg.C | 100 Percent | 1002 hPa | 0 | 0 |
| 1744830002 | 18.6 Deg.C | 99 Percent | 1003 hPa | 0 | 0 |
| 1744829702 | 18.7 Deg.C | 99 Percent | 1003 hPa | 0 | 0 |
| 1744829402 | 18.3 Deg.C | 98 Percent | 1002 hPa | 0 | 0 |
| 1744829102 | 18.6 Deg.C | 97 Percent | 1003 hPa | 0 | 0 |
| 1744828802 | 18.6 Deg.C | 95 Percent | 1003 hPa | 0 | 0 |
| 1744828503 | 18.1 Deg.C | 92 Percent | 1002 hPa | 0 | 0 |
| 1744828202 | 18 Deg.C | 90 Percent | 1002 hPa | 0 | 0 |
| 1744827903 | 17.9 Deg.C | 95 Percent | 1002 hPa | 0 | 0 |
| 1744827602 | 18.1 Deg.C | 94 Percent | 1002 hPa | 0 | 0 |
| 1744827303 | 16.9 Deg.C | 88 Percent | 1001 hPa | 0 | 0 |
| 1744827002 | 17.7 Deg.C | 76 Percent | 1002 hPa | 0 | 0 |
| 1744826702 | 17.5 Deg.C | 71 Percent | 1002 hPa | 0 | 0 |
| 1744826402 | 17.4 Deg.C | 73 Percent | 1002 hPa | 0 | 0 |
| 1744826102 | 17.2 Deg.C | 72 Percent | 1002 hPa | 0 | 0 |
| 1744825802 | 17.5 Deg.C | 77 Percent | 1002 hPa | 0 | 0 |
| 1744825502 | 17.7 Deg.C | 83 Percent | 1002 hPa | 0 | 0 |
| 1744825202 | 17.8 Deg.C | 77 Percent | 1002 hPa | 0 | 0 |
| 1744824903 | 17.4 Deg.C | 70 Percent | 1002 hPa | 0 | 0 |
| 1744824602 | 17.7 Deg.C | 68 Percent | 1002 hPa | 0 | 0 |
*Used Equation Coefficients:
Outside Temperature: 0, 0.1, 0
Air Humidity: 0, 1, 0
Atmospheric pressure: 0, 1, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)