This is the latest recevied telemetry packets stored in our database for station/object YB2VNE-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
|---|---|---|---|---|---|
| 1754478218 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 4 % |
| 1754477896 | 0 Pkt | 0 Pkt | 0 Pkt | -65 dBm | 4 % |
| 1754477574 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 4 % |
| 1754477252 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 7 % |
| 1754476930 | 0 Pkt | 0 Pkt | 0 Pkt | -62 dBm | 11 % |
| 1754476608 | 0 Pkt | 0 Pkt | 0 Pkt | -63 dBm | 16 % |
| 1754476286 | 0 Pkt | 0 Pkt | 0 Pkt | -61 dBm | 22 % |
| 1754475964 | 0 Pkt | 0 Pkt | 0 Pkt | -62 dBm | 35 % |
| 1754475642 | 0 Pkt | 0 Pkt | 0 Pkt | -62 dBm | 47 % |
| 1754475320 | 0 Pkt | 0 Pkt | 0 Pkt | -62 dBm | 54 % |
| 1754474998 | 0 Pkt | 0 Pkt | 0 Pkt | -62 dBm | 61 % |
| 1754474676 | 0 Pkt | 0 Pkt | 0 Pkt | -65 dBm | 66 % |
| 1754474354 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 73 % |
| 1754474032 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 76 % |
| 1754473710 | 0 Pkt | 0 Pkt | 0 Pkt | -62 dBm | 82 % |
| 1754473388 | 0 Pkt | 0 Pkt | 0 Pkt | -63 dBm | 88 % |
| 1754473066 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 86 % |
| 1754472744 | 0 Pkt | 0 Pkt | 0 Pkt | -66 dBm | 89 % |
| 1754472422 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 93 % |
| 1754472100 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 94 % |
| 1754471778 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 93 % |
| 1754471456 | 0 Pkt | 0 Pkt | 0 Pkt | -65 dBm | 91 % |
| 1754471134 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 90 % |
| 1754470812 | 0 Pkt | 1 Pkt | 0 Pkt | -66 dBm | 89 % |
| 1754470490 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 89 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)