This is the latest recevied telemetry packets stored in our database for station/object WB0BBE-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1779819244 | 12.48 Volts | 73.88 Deg.F | 0 | 0 | 0 |
| 1779817454 | 12.45 Volts | 72.12 Deg.F | 0 | 0 | 0 |
| 1779816559 | 12.48 Volts | 71.25 Deg.F | 0 | 0 | 0 |
| 1779815665 | 12.45 Volts | 72.12 Deg.F | 0 | 0 | 0 |
| 1779814770 | 12.48 Volts | 68.61 Deg.F | 0 | 0 | 0 |
| 1779813875 | 12.48 Volts | 67.73 Deg.F | 0 | 0 | 0 |
| 1779812980 | 12.45 Volts | 66.85 Deg.F | 0 | 0 | 0 |
| 1779812085 | 12.48 Volts | 65.97 Deg.F | 0 | 0 | 0 |
| 1779811191 | 12.48 Volts | 64.21 Deg.F | 0 | 0 | 0 |
| 1779810296 | 12.48 Volts | 63.34 Deg.F | 0 | 0 | 0 |
| 1779809401 | 12.48 Volts | 61.58 Deg.F | 0 | 0 | 0 |
| 1779808507 | 12.48 Volts | 60.7 Deg.F | 0 | 0 | 0 |
| 1779807612 | 12.48 Volts | 59.82 Deg.F | 0 | 0 | 0 |
| 1779807499 | 12.48 Volts | 69.49 Deg.F | 0 | 0 | 0 |
| 1779806718 | 12.48 Volts | 58.94 Deg.F | 0 | 0 | 0 |
| 1779805823 | 12.48 Volts | 58.06 Deg.F | 0 | 0 | 0 |
| 1779804929 | 12.45 Volts | 58.06 Deg.F | 0 | 0 | 0 |
| 1779804035 | 12.48 Volts | 57.18 Deg.F | 0 | 0 | 0 |
| 1779803141 | 12.48 Volts | 56.3 Deg.F | 0 | 0 | 0 |
| 1779802246 | 12.45 Volts | 56.3 Deg.F | 0 | 0 | 0 |
| 1779801352 | 12.48 Volts | 56.3 Deg.F | 0 | 0 | 0 |
| 1779800457 | 12.48 Volts | 56.3 Deg.F | 0 | 0 | 0 |
| 1779799563 | 12.48 Volts | 56.3 Deg.F | 0 | 0 | 0 |
| 1779798668 | 12.48 Volts | 57.18 Deg.F | 0 | 0 | 0 |
| 1779797774 | 12.48 Volts | 57.18 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.0293, 0
Value2: 0, 0.879, -459.67
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)