This is the latest recevied telemetry packets stored in our database for station/object LZ1RZZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Outside Temperature* | Air Humidity* | Atmospheric pressure* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274676 | -147.7 Deg.C | 100 Percent | 605 hPa | 0 | 0 |
| 1836274526 | -147.7 Deg.C | 100 Percent | 605 hPa | 0 | 0 |
| 1836274376 | -147.7 Deg.C | 100 Percent | 605 hPa | 0 | 0 |
| 1836274225 | -147.7 Deg.C | 100 Percent | 605 hPa | 0 | 0 |
| 1836274076 | -147.7 Deg.C | 100 Percent | 605 hPa | 0 | 0 |
| 1778042101 | 10.2 Deg.C | 100 Percent | 995 hPa | 0 | 0 |
| 1778041802 | 10.4 Deg.C | 100 Percent | 995 hPa | 0 | 0 |
| 1778041502 | 10.3 Deg.C | 100 Percent | 996 hPa | 0 | 0 |
| 1778041202 | 10.3 Deg.C | 100 Percent | 996 hPa | 0 | 0 |
| 1778040903 | 10.1 Deg.C | 100 Percent | 996 hPa | 0 | 0 |
| 1778040602 | 10.3 Deg.C | 100 Percent | 995 hPa | 0 | 0 |
| 1778040302 | 10.6 Deg.C | 100 Percent | 996 hPa | 0 | 0 |
| 1778040002 | 9.8 Deg.C | 100 Percent | 995 hPa | 0 | 0 |
| 1778039702 | 10.2 Deg.C | 100 Percent | 996 hPa | 0 | 0 |
| 1778039402 | 9.7 Deg.C | 100 Percent | 994 hPa | 0 | 0 |
| 1778039101 | 10.8 Deg.C | 100 Percent | 996 hPa | 0 | 0 |
| 1778038802 | 10.6 Deg.C | 100 Percent | 995 hPa | 0 | 0 |
| 1778038502 | 11 Deg.C | 99 Percent | 996 hPa | 0 | 0 |
| 1778038201 | 10.7 Deg.C | 100 Percent | 996 hPa | 0 | 0 |
| 1778037902 | 10.3 Deg.C | 100 Percent | 995 hPa | 0 | 0 |
| 1778037602 | 10.6 Deg.C | 100 Percent | 996 hPa | 0 | 0 |
| 1778037303 | 11 Deg.C | 100 Percent | 996 hPa | 0 | 0 |
| 1778037002 | 11.1 Deg.C | 98 Percent | 996 hPa | 0 | 0 |
| 1778036702 | 11.3 Deg.C | 97 Percent | 995 hPa | 0 | 0 |
| 1778036401 | 10.8 Deg.C | 99 Percent | 995 hPa | 0 | 0 |
*Used Equation Coefficients:
Outside Temperature: 0, 0.1, 0
Air Humidity: 0, 1, 0
Atmospheric pressure: 0, 1, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)