APRS Track Direct

My position About ☰

reset

TB6BQQ-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TB6BQQ-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1779786978	15 Pkt	4 Pkt	4 Pkt	-34 dBm	0.14 V
1779786351	31 Pkt	2 Pkt	1 Pkt	-34 dBm	0.14 V
1779785721	24 Pkt	7 Pkt	4 Pkt	-34 dBm	0.14 V
1779785091	43 Pkt	5 Pkt	3 Pkt	-34 dBm	0.14 V
1779784457	42 Pkt	4 Pkt	3 Pkt	-35 dBm	0.14 V
1779783825	33 Pkt	0 Pkt	5 Pkt	-35 dBm	0.14 V
1779783193	38 Pkt	6 Pkt	5 Pkt	-35 dBm	0.14 V
1779782559	44 Pkt	3 Pkt	5 Pkt	-35 dBm	0.14 V
1779781923	56 Pkt	4 Pkt	9 Pkt	-34 dBm	0.14 V
1779781286	54 Pkt	1 Pkt	15 Pkt	-34 dBm	0.14 V
1779780648	60 Pkt	3 Pkt	3 Pkt	-34 dBm	0.14 V
1779780011	52 Pkt	4 Pkt	6 Pkt	-34 dBm	0.14 V
1779779374	53 Pkt	3 Pkt	5 Pkt	-35 dBm	0.14 V
1779778738	31 Pkt	4 Pkt	3 Pkt	-35 dBm	0.14 V
1779778109	35 Pkt	11 Pkt	4 Pkt	-35 dBm	0.14 V
1779777476	49 Pkt	9 Pkt	5 Pkt	-35 dBm	0.14 V
1779776841	40 Pkt	7 Pkt	5 Pkt	-35 dBm	0.14 V
1779776210	44 Pkt	10 Pkt	7 Pkt	-35 dBm	0.14 V
1779775577	43 Pkt	7 Pkt	3 Pkt	-36 dBm	0.14 V
1779774945	29 Pkt	8 Pkt	4 Pkt	-36 dBm	0.14 V
1779774318	42 Pkt	12 Pkt	3 Pkt	-35 dBm	0.14 V
1779773684	46 Pkt	9 Pkt	3 Pkt	-34 dBm	0.14 V
1779773049	43 Pkt	9 Pkt	6 Pkt	-35 dBm	0.14 V
1779772415	58 Pkt	9 Pkt	3 Pkt	-35 dBm	0.14 V
1779771778	45 Pkt	7 Pkt	3 Pkt	-35 dBm	0.14 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)