This is the latest recevied telemetry packets stored in our database for station/object ER-DM0NEY. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274676 | 0 | 7 | 0 | 1 | 0 |
| 1836274526 | 0 | 7 | 0 | 1 | 0 |
| 1836274076 | 0 | 7 | 0 | 1 | 0 |
| 1762290302 | 0 | 999 | 0 | 1 | 0 |
| 1762289702 | 0 | 999 | 0 | 1 | 0 |
| 1762289102 | 0 | 999 | 0 | 1 | 0 |
| 1762288502 | 0 | 999 | 0 | 1 | 0 |
| 1762287902 | 0 | 999 | 0 | 1 | 0 |
| 1762287302 | 0 | 999 | 0 | 1 | 0 |
| 1762286702 | 0 | 759 | 0 | 8 | 0 |
| 1762286102 | 0 | 127 | 0 | 6 | 0 |
| 1762285502 | 0 | 71 | 0 | 7 | 0 |
| 1762284902 | 0 | 349 | 0 | 13 | 0 |
| 1762284302 | 0 | 39 | 0 | 2 | 0 |
| 1762283702 | 0 | 154 | 0 | 5 | 0 |
| 1762283102 | 0 | 162 | 0 | 5 | 0 |
| 1762282502 | 0 | 987 | 0 | 2 | 0 |
| 1762281902 | 0 | 999 | 0 | 1 | 0 |
| 1762281302 | 0 | 974 | 0 | 3 | 0 |
| 1762280702 | 0 | 898 | 0 | 4 | 0 |
| 1762280102 | 0 | 745 | 0 | 4 | 0 |
| 1762279502 | 0 | 59 | 0 | 2 | 0 |
| 1762278902 | 0 | 38 | 0 | 3 | 0 |
| 1762278302 | 0 | 496 | 0 | 4 | 0 |
| 1762277702 | 0 | 999 | 0 | 1 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)