APRS Track Direct

My position About ☰

reset

SR9NSK-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR9NSK-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10min*	Tx10min*	Digi10min*	Tempre*
1786729054	114 Pkt	9 Pkt	6 Pkt	37 DegC
1786728452	107 Pkt	5 Pkt	3 Pkt	37 DegC
1786727852	144 Pkt	7 Pkt	4 Pkt	37 DegC
1786727250	110 Pkt	12 Pkt	9 Pkt	37 DegC
1786726647	113 Pkt	7 Pkt	4 Pkt	37 DegC
1786726045	118 Pkt	6 Pkt	4 Pkt	37 DegC
1786725445	117 Pkt	13 Pkt	9 Pkt	37 DegC
1786724842	99 Pkt	11 Pkt	5 Pkt	37 DegC
1786724232	109 Pkt	12 Pkt	9 Pkt	37 DegC
1786723630	118 Pkt	12 Pkt	9 Pkt	37 DegC
1786723030	90 Pkt	8 Pkt	5 Pkt	37 DegC
1786722428	105 Pkt	7 Pkt	5 Pkt	37 DegC
1786721828	108 Pkt	14 Pkt	11 Pkt	37 DegC
1786721226	116 Pkt	7 Pkt	4 Pkt	37 DegC
1786720624	106 Pkt	12 Pkt	9 Pkt	37 DegC
1786720022	96 Pkt	8 Pkt	6 Pkt	37 DegC
1786719422	113 Pkt	12 Pkt	8 Pkt	37 DegC
1786718820	110 Pkt	9 Pkt	7 Pkt	37 DegC
1786718220	126 Pkt	13 Pkt	10 Pkt	37 DegC
1786717618	114 Pkt	5 Pkt	3 Pkt	37 DegC
1786717019	114 Pkt	14 Pkt	10 Pkt	37 DegC
1786716414	120 Pkt	12 Pkt	10 Pkt	36.5 DegC
1786715814	132 Pkt	16 Pkt	9 Pkt	36.5 DegC
1786715203	107 Pkt	7 Pkt	4 Pkt	36.5 DegC
1786714603	118 Pkt	11 Pkt	8 Pkt	36.5 DegC

*Used Equation Coefficients:

Rx10min: 0, 1, 0

Tx10min: 0, 1, 0

Digi10min: 0, 1, 0

HostTx10m: 0, 1, 0

Tempre: 0, 0.5, -50

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)