APRS Track Direct

My position About ☰

reset

S55YZA-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object S55YZA-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1790637970	13.19 Volt	860 Pkt	270 Pkt	72 Pcnt	18.5 C
1790635867	12.96 Volt	820 Pkt	250 Pkt	72 Pcnt	18.5 C
1790633765	13.19 Volt	850 Pkt	250 Pkt	71 Pcnt	19 C
1790631663	13.19 Volt	820 Pkt	250 Pkt	71 Pcnt	19 C
1790629563	13.19 Volt	740 Pkt	230 Pkt	68 Pcnt	19 C
1790627459	13.19 Volt	720 Pkt	220 Pkt	65 Pcnt	19 C
1790625357	13.19 Volt	800 Pkt	240 Pkt	67 Pcnt	19 C
1790623255	13.19 Volt	820 Pkt	260 Pkt	68 Pcnt	19 C
1790621153	13.19 Volt	860 Pkt	260 Pkt	69 Pcnt	19 C
1790619051	13.19 Volt	900 Pkt	280 Pkt	72 Pcnt	19.5 C
1790616949	13.19 Volt	890 Pkt	290 Pkt	72 Pcnt	20 C
1790614847	13.19 Volt	880 Pkt	270 Pkt	71 Pcnt	20.5 C
1790612744	13.19 Volt	890 Pkt	280 Pkt	71 Pcnt	20 C
1790610642	13.19 Volt	890 Pkt	270 Pkt	73 Pcnt	20 C
1790608541	13.19 Volt	950 Pkt	290 Pkt	73 Pcnt	20.5 C
1790606438	13.19 Volt	1000 Pkt	320 Pkt	73 Pcnt	20 C
1790604343	13.19 Volt	1010 Pkt	330 Pkt	72 Pcnt	20.5 C
1790602234	13.19 Volt	1000 Pkt	320 Pkt	71 Pcnt	20.5 C
1790600133	13.19 Volt	900 Pkt	290 Pkt	72 Pcnt	20.5 C
1790598033	13.19 Volt	930 Pkt	290 Pkt	72 Pcnt	20.5 C
1790595928	12.88 Volt	830 Pkt	270 Pkt	70 Pcnt	20.5 C
1790593826	13.19 Volt	690 Pkt	230 Pkt	72 Pcnt	20.5 C
1790591724	13.19 Volt	860 Pkt	270 Pkt	70 Pcnt	20.5 C
1790589624	13.19 Volt	1000 Pkt	280 Pkt	67 Pcnt	20 C
1790587524	13.19 Volt	990 Pkt	280 Pkt	63 Pcnt	20.5 C

*Used Equation Coefficients:

Vin: 0, 0.07713, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -69

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)