This is the latest recevied telemetry packets stored in our database for station/object BM2MWA-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | CPU_TEMPERATURE* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274695 | 38 degree | 0 | 0 | 0 | 0 |
| 1836274545 | 37 degree | 0 | 0 | 0 | 0 |
| 1836274397 | 37 degree | 0 | 0 | 0 | 0 |
| 1836274245 | 38 degree | 0 | 0 | 0 | 0 |
| 1836274095 | 36 degree | 0 | 0 | 0 | 0 |
| 1762274722 | 33 degree | 0 | 0 | 0 | 0 |
| 1762274422 | 34 degree | 0 | 0 | 0 | 0 |
| 1762274122 | 34 degree | 0 | 0 | 0 | 0 |
| 1762273822 | 34 degree | 0 | 0 | 0 | 0 |
| 1762273522 | 33 degree | 0 | 0 | 0 | 0 |
| 1762273222 | 34 degree | 0 | 0 | 0 | 0 |
| 1762272922 | 34 degree | 0 | 0 | 0 | 0 |
| 1762272622 | 33 degree | 0 | 0 | 0 | 0 |
| 1762272322 | 34 degree | 0 | 0 | 0 | 0 |
| 1762272042 | 33 degree | 0 | 0 | 0 | 0 |
| 1762271722 | 34 degree | 0 | 0 | 0 | 0 |
| 1762271422 | 35 degree | 0 | 0 | 0 | 0 |
| 1762271122 | 34 degree | 0 | 0 | 0 | 0 |
| 1762270822 | 34 degree | 0 | 0 | 0 | 0 |
| 1762270522 | 34 degree | 0 | 0 | 0 | 0 |
| 1762270222 | 35 degree | 0 | 0 | 0 | 0 |
| 1762269922 | 34 degree | 0 | 0 | 0 | 0 |
| 1762269622 | 34 degree | 0 | 0 | 0 | 0 |
| 1762269322 | 34 degree | 0 | 0 | 0 | 0 |
| 1762269022 | 34 degree | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
CPU_TEMPERATURE: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)