APRS Track Direct

My position About ☰

reset

TF3GS Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TF3GS. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vin*	Rx1h*	Eff1h*	EffT*
1779786279	12.72 Volt	310 Pkt	100 Pcnt	94 Pcnt
1779785079	12.72 Volt	290 Pkt	98 Pcnt	94 Pcnt
1779783879	12.72 Volt	300 Pkt	97 Pcnt	94 Pcnt
1779782679	12.72 Volt	230 Pkt	96 Pcnt	94 Pcnt
1779781479	12.72 Volt	220 Pkt	94 Pcnt	94 Pcnt
1779780279	12.72 Volt	220 Pkt	94 Pcnt	94 Pcnt
1779779079	12.72 Volt	210 Pkt	93 Pcnt	94 Pcnt
1779777879	12.72 Volt	190 Pkt	86 Pcnt	94 Pcnt
1779776679	12.72 Volt	200 Pkt	86 Pcnt	94 Pcnt
1779775479	12.72 Volt	200 Pkt	85 Pcnt	94 Pcnt
1779774279	12.72 Volt	200 Pkt	88 Pcnt	94 Pcnt
1779773079	12.72 Volt	180 Pkt	72 Pcnt	94 Pcnt
1779771879	12.72 Volt	170 Pkt	71 Pcnt	94 Pcnt
1779770679	12.72 Volt	170 Pkt	70 Pcnt	94 Pcnt
1779769480	12.72 Volt	210 Pkt	88 Pcnt	94 Pcnt
1779768280	12.72 Volt	260 Pkt	91 Pcnt	94 Pcnt
1779767080	12.72 Volt	310 Pkt	99 Pcnt	94 Pcnt
1779765880	12.72 Volt	290 Pkt	99 Pcnt	94 Pcnt
1779764680	12.72 Volt	240 Pkt	98 Pcnt	94 Pcnt
1779763480	12.72 Volt	250 Pkt	98 Pcnt	94 Pcnt
1779762280	12.72 Volt	240 Pkt	98 Pcnt	94 Pcnt
1779761080	12.72 Volt	240 Pkt	98 Pcnt	94 Pcnt
1779759880	12.72 Volt	280 Pkt	99 Pcnt	94 Pcnt
1779758680	12.72 Volt	240 Pkt	100 Pcnt	94 Pcnt
1779757480	12.72 Volt	320 Pkt	100 Pcnt	94 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

EffT: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)