This is the latest recevied telemetry packets stored in our database for station/object OK5TVR-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1750147306 | 4 | 4 | 41 | 86 | 93.89 |
| 1750146405 | 6 | 6 | 41 | 85 | 92.78 |
| 1750145504 | 5 | 5 | 41 | 84 | 92.78 |
| 1750144603 | 5 | 5 | 41 | 83 | 91.67 |
| 1750143702 | 7 | 7 | 41 | 82 | 92.22 |
| 1750142801 | 5 | 5 | 41 | 81 | 92.22 |
| 1750141901 | 4 | 4 | 41 | 80 | 93.33 |
| 1750141004 | 2 | 2 | 7 | 79 | 93.89 |
| 1750140098 | 7 | 7 | 41 | 78 | 95 |
| 1750139197 | 7 | 7 | 0 | 77 | 92.22 |
| 1750138296 | 10 | 10 | 16 | 76 | 90 |
| 1750137395 | 35 | 34 | 41 | 75 | 53.33 |
| 1750136494 | 16 | 16 | 9 | 74 | 53.33 |
| 1750135593 | 11 | 11 | 41 | 73 | 90.56 |
| 1750134692 | 4 | 4 | 41 | 72 | 91.11 |
| 1750133791 | 8 | 8 | 41 | 71 | 88.89 |
| 1750132890 | 6 | 6 | 41 | 70 | 89.44 |
| 1750131988 | 6 | 6 | 41 | 69 | 89.44 |
| 1750131087 | 6 | 6 | 41 | 68 | 87.78 |
| 1750130186 | 8 | 8 | 112 | 67 | 88.89 |
| 1750129285 | 4 | 4 | 41 | 66 | 88.89 |
| 1750128384 | 5 | 5 | 41 | 65 | 53.33 |
| 1750127483 | 6 | 6 | 9 | 64 | 53.33 |
| 1750126584 | 5 | 5 | 112 | 63 | 89.44 |
| 1750125680 | 5 | 5 | 9 | 62 | 53.33 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)