This is the latest recevied telemetry packets stored in our database for station/object TI0ATI-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1779777222 | 3.24 VDC | 0 VDC | 0 | 0 | 0 |
| 1779776322 | 3.44 VDC | 0 VDC | 0 | 0 | 0 |
| 1779775421 | 3.52 VDC | 0 VDC | 0 | 0 | 0 |
| 1779774521 | 3.61 VDC | 0 VDC | 0 | 0 | 0 |
| 1779773621 | 3.63 VDC | 0 VDC | 0 | 0 | 0 |
| 1779772721 | 3.66 VDC | 0 VDC | 0 | 0 | 0 |
| 1779771821 | 3.69 VDC | 0 VDC | 0 | 0 | 0 |
| 1779770921 | 3.69 VDC | 0 VDC | 0 | 0 | 0 |
| 1779770021 | 3.76 VDC | 0 VDC | 0 | 0 | 0 |
| 1779769121 | 3.75 VDC | 0 VDC | 0 | 0 | 0 |
| 1779768221 | 3.77 VDC | 0 VDC | 0 | 0 | 0 |
| 1779767321 | 3.78 VDC | 0 VDC | 0 | 0 | 0 |
| 1779766421 | 3.79 VDC | 0 VDC | 0 | 0 | 0 |
| 1779765521 | 3.79 VDC | 0 VDC | 0 | 0 | 0 |
| 1779764621 | 3.8 VDC | 0 VDC | 0 | 0 | 0 |
| 1779762820 | 3.81 VDC | 0 VDC | 0 | 0 | 0 |
| 1779761920 | 3.8 VDC | 0 VDC | 0 | 0 | 0 |
| 1779761020 | 3.82 VDC | 0 VDC | 0 | 0 | 0 |
| 1779760120 | 3.83 VDC | 0 VDC | 0 | 0 | 0 |
| 1779759220 | 3.86 VDC | 0 VDC | 0 | 0 | 0 |
| 1779758320 | 3.84 VDC | 0 VDC | 0 | 0 | 0 |
| 1779757420 | 3.84 VDC | 0 VDC | 0 | 0 | 0 |
| 1779756525 | 3.85 VDC | 0 VDC | 0 | 0 | 0 |
| 1779755620 | 3.86 VDC | 0 VDC | 0 | 0 | 0 |
| 1779754720 | 3.89 VDC | 0 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)