This is the latest recevied telemetry packets stored in our database for station/object SP2ROC-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RPM* | VBAT* | TEMP* | TRIP* | MTH* |
|---|---|---|---|---|---|
| 1794835760 | 1354 rpm | 12.74 V | 61 degC | 0.1 km | 88 h |
| 1794835700 | 957 rpm | 12.76 V | 61 degC | 0.1 km | 88 h |
| 1794835670 | 976 rpm | 12.74 V | 61 degC | 0.1 km | 88 h |
| 1794835640 | 931 rpm | 12.76 V | 61 degC | 0.1 km | 88 h |
| 1794835610 | 934 rpm | 12.76 V | 61 degC | 0.1 km | 88 h |
| 1794835580 | 931 rpm | 12.76 V | 61 degC | 0.1 km | 88 h |
| 1794835550 | 931 rpm | 12.76 V | 61 degC | 0.1 km | 88 h |
| 1794835520 | 932 rpm | 12.76 V | 61 degC | 0.1 km | 88 h |
| 1794835490 | 932 rpm | 12.76 V | 61 degC | 0.1 km | 88 h |
| 1794835460 | 930 rpm | 12.76 V | 61 degC | 0.1 km | 88 h |
| 1794835430 | 930 rpm | 12.74 V | 61 degC | 0.1 km | 88 h |
| 1794835400 | 913 rpm | 12.74 V | 60 degC | 0 km | 88 h |
| 1794835370 | 931 rpm | 12.76 V | 60 degC | 0 km | 88 h |
| 1794835340 | 930 rpm | 12.76 V | 60 degC | 0 km | 88 h |
| 1794835310 | 931 rpm | 12.74 V | 60 degC | 0 km | 88 h |
| 1794835280 | 931 rpm | 12.76 V | 60 degC | 0 km | 88 h |
| 1794835250 | 929 rpm | 12.74 V | 60 degC | 0 km | 88 h |
| 1794835220 | 932 rpm | 12.76 V | 60 degC | 0 km | 88 h |
| 1794835190 | 931 rpm | 12.74 V | 60 degC | 0 km | 88 h |
| 1794835160 | 928 rpm | 12.74 V | 59 degC | 0 km | 88 h |
| 1794835130 | 927 rpm | 12.76 V | 59 degC | 0 km | 88 h |
| 1794835100 | 931 rpm | 12.73 V | 59 degC | 0 km | 88 h |
| 1794835070 | 929 rpm | 12.74 V | 58 degC | 0 km | 88 h |
| 1794835040 | 927 rpm | 12.73 V | 57 degC | 0 km | 88 h |
| 1794835010 | 926 rpm | 12.76 V | 57 degC | 0 km | 88 h |
*Used Equation Coefficients:
RPM: 0, 1, 0
VBAT: 0, 0.01, 0
TEMP: 0, 1, -100
TRIP: 0, 0.1, 0
MTH: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)