APRS Track Direct

My position About ☰

reset

LU1HRA-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LU1HRA-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1779797644	0 Pkt	0 Pkt	-33 dBm	11.98 V
1779795820	6 Pkt	0 Pkt	-32 dBm	11.92 V
1779793998	0 Pkt	0 Pkt	-35 dBm	11.94 V
1779792177	7 Pkt	1 Pkt	-43 dBm	12 V
1779790353	0 Pkt	0 Pkt	-45 dBm	11.94 V
1779788531	5 Pkt	0 Pkt	-50 dBm	11.96 V
1779786708	0 Pkt	0 Pkt	-42 dBm	11.98 V
1779784884	7 Pkt	0 Pkt	-49 dBm	11.96 V
1779783063	3 Pkt	0 Pkt	-40 dBm	11.94 V
1779781240	7 Pkt	0 Pkt	-35 dBm	11.94 V
1779779416	1 Pkt	0 Pkt	-45 dBm	11.96 V
1779777594	8 Pkt	0 Pkt	-42 dBm	11.94 V
1779775769	2 Pkt	0 Pkt	-43 dBm	11.94 V
1779773949	2 Pkt	0 Pkt	-38 dBm	11.96 V
1779772126	2 Pkt	0 Pkt	-45 dBm	11.98 V
1779770304	7 Pkt	0 Pkt	-42 dBm	12 V
1779768479	2 Pkt	0 Pkt	-41 dBm	11.98 V
1779766656	4 Pkt	0 Pkt	-43 dBm	12.02 V
1779764833	7 Pkt	0 Pkt	-44 dBm	11.96 V
1779763008	0 Pkt	0 Pkt	-35 dBm	11.96 V
1779761187	3 Pkt	0 Pkt	-42 dBm	11.98 V
1779759364	0 Pkt	0 Pkt	-37 dBm	11.98 V
1779757542	2 Pkt	0 Pkt	-47 dBm	12 V
1779755718	0 Pkt	0 Pkt	-37 dBm	12.02 V
1779753898	0 Pkt	0 Pkt	-44 dBm	11.96 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)