This is the latest recevied telemetry packets stored in our database for station/object TB1YZC-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | CpuTemp* | FreeMem* | WiFi* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786785974 | 42 C | 90 KB | -76 dBm | 0 | 0 |
| 1786785371 | 42 C | 90 KB | -77 dBm | 0 | 0 |
| 1786784768 | 43 C | 90 KB | -75 dBm | 0 | 0 |
| 1786784165 | 44 C | 90 KB | -76 dBm | 0 | 0 |
| 1786783562 | 42 C | 90 KB | -76 dBm | 0 | 0 |
| 1786782959 | 42 C | 90 KB | -75 dBm | 0 | 0 |
| 1786782355 | 41 C | 90 KB | -76 dBm | 0 | 0 |
| 1786781752 | 42 C | 90 KB | -76 dBm | 0 | 0 |
| 1786781149 | 41 C | 90 KB | -76 dBm | 0 | 0 |
| 1786780546 | 41 C | 90 KB | -76 dBm | 0 | 0 |
| 1786779943 | 42 C | 90 KB | -75 dBm | 0 | 0 |
| 1786779340 | 41 C | 90 KB | -76 dBm | 0 | 0 |
| 1786778737 | 43 C | 91 KB | -75 dBm | 0 | 0 |
| 1786778232 | 43 C | 90 KB | -77 dBm | 0 | 0 |
| 1786777628 | 45 C | 90 KB | -77 dBm | 0 | 0 |
| 1786777025 | 42 C | 90 KB | -77 dBm | 0 | 0 |
| 1786776422 | 42 C | 90 KB | -76 dBm | 0 | 0 |
| 1786775819 | 42 C | 90 KB | -75 dBm | 0 | 0 |
| 1786775216 | 42 C | 90 KB | -76 dBm | 0 | 0 |
| 1786774613 | 43 C | 90 KB | -76 dBm | 0 | 0 |
| 1786774010 | 43 C | 90 KB | -76 dBm | 0 | 0 |
| 1786773406 | 41 C | 90 KB | -74 dBm | 0 | 0 |
| 1786772803 | 41 C | 90 KB | -76 dBm | 0 | 0 |
| 1786772200 | 41 C | 90 KB | -75 dBm | 0 | 0 |
| 1786771597 | 41 C | 90 KB | -76 dBm | 0 | 0 |
*Used Equation Coefficients:
CpuTemp: 0, 1, 0
FreeMem: 0, 1, 0
WiFi: 0, 1, -150
Value4: 0, 0, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)