APRS Track Direct

My position About ☰

reset

N6BA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N6BA. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx_10min*	%Drop_10min*	%Direct_10min*	RxAltFreq_10min*
1779758403	115 Pkts	51.3 %	12.17 %	0 Pkts
1779757803	105 Pkts	45.71 %	11.43 %	1 Pkts
1779757203	125 Pkts	41.6 %	10.4 %	0 Pkts
1779756603	150 Pkts	49.33 %	10.67 %	0 Pkts
1779756003	112 Pkts	47.32 %	9.82 %	0 Pkts
1779755403	122 Pkts	50.82 %	11.48 %	2 Pkts
1779754803	155 Pkts	46.45 %	10.32 %	0 Pkts
1779754203	137 Pkts	50.06 %	13.35 %	1 Pkts
1779753603	107 Pkts	42.06 %	9.35 %	0 Pkts
1779753003	143 Pkts	49.65 %	15.38 %	0 Pkts
1779752403	116 Pkts	49.14 %	11.21 %	0 Pkts
1779751803	125 Pkts	48.8 %	13.6 %	2 Pkts
1779751203	141 Pkts	46.81 %	7.8 %	0 Pkts
1779750603	120 Pkts	47.5 %	10.83 %	0 Pkts
1779750003	112 Pkts	43.75 %	9.82 %	1 Pkts
1779749403	127 Pkts	55.12 %	15.75 %	0 Pkts
1779748803	119 Pkts	44.54 %	10.92 %	0 Pkts
1779748203	140 Pkts	42.86 %	9.29 %	1 Pkts
1779747603	155 Pkts	52.26 %	14.84 %	0 Pkts
1779747003	155 Pkts	54.19 %	12.26 %	0 Pkts
1779746403	132 Pkts	44.7 %	9.09 %	1 Pkts
1779745803	132 Pkts	43.18 %	14.39 %	0 Pkts
1779745203	100 Pkts	47 %	13 %	0 Pkts
1779744603	110 Pkts	44.55 %	10 %	1 Pkts
1779744003	139 Pkts	47 %	12.14 %	0 Pkts

*Used Equation Coefficients:

Rx_10min: 0, 1, 0

RxSat_10min: 0, 1, 0

%Drop_10min: 0, 1, 0.304348

%Direct_10min: 0, 1, 0.173913

RxAltFreq_10min: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)