APRS Track Direct

My position About ☰

reset

BM2OBM-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BM2OBM-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	CPUTemp*	RxPkts/10m*	RxPkts/1h*	RxPkts/24h*	DiGi*
1786724952	41 C	13 p	69 p	1166 p	6385 p
1786723752	41 C	12 p	77 p	1143 p	6381 p
1786722553	40 C	14 p	87 p	1124 p	6378 p
1786721352	39 C	20 p	92 p	1097 p	6373 p
1786720152	40 C	17 p	92 p	1066 p	6368 p
1786718952	40 C	16 p	94 p	1037 p	6364 p
1786717751	41 C	18 p	88 p	1005 p	6357 p
1786716551	41 C	18 p	81 p	974 p	6349 p
1786715351	42 C	12 p	78 p	943 p	6342 p
1786714152	42 C	12 p	91 p	917 p	6337 p
1786712951	40 C	16 p	101 p	893 p	6332 p
1786711752	40 C	19 p	102 p	865 p	6326 p
1786710552	40 C	18 p	85 p	826 p	6320 p
1786709352	39 C	15 p	92 p	792 p	6312 p
1786708151	40 C	11 p	98 p	763 p	6306 p
1786706952	40 C	15 p	111 p	741 p	6302 p
1786705752	40 C	22 p	128 p	700 p	6293 p
1786704552	41 C	12 p	120 p	665 p	6284 p
1786703352	41 C	31 p	111 p	630 p	6281 p
1786702153	42 C	14 p	89 p	572 p	6270 p
1786700952	41 C	12 p	95 p	545 p	6265 p
1786699751	41 C	25 p	107 p	519 p	6260 p
1786698552	41 C	11 p	92 p	483 p	6257 p
1786697351	41 C	20 p	86 p	450 p	6254 p
1786696152	42 C	11 p	78 p	412 p	6249 p

*Used Equation Coefficients:

CPUTemp: 0, 1, 0

RxPkts/10m: 0, 1, 0

RxPkts/1h: 0, 1, 0

RxPkts/24h: 0, 1, 0

DiGi: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)