APRS Track Direct

My position About ☰

reset

S55YKA-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object S55YKA-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1732250603	13.75 Volt	890 Pkt	250 Pkt	74 Pcnt
1732250304	13.67 Volt	900 Pkt	260 Pkt	74 Pcnt
1732250303	13.67 Volt	900 Pkt	260 Pkt	74 Pcnt
1732250003	13.75 Volt	910 Pkt	250 Pkt	74 Pcnt
1732249704	13.75 Volt	930 Pkt	260 Pkt	73 Pcnt
1732249703	13.75 Volt	930 Pkt	260 Pkt	73 Pcnt
1732249403	13.75 Volt	900 Pkt	250 Pkt	73 Pcnt
1732249104	13.75 Volt	910 Pkt	250 Pkt	73 Pcnt
1732249103	13.75 Volt	910 Pkt	250 Pkt	73 Pcnt
1732248804	13.75 Volt	900 Pkt	240 Pkt	73 Pcnt
1732248505	13.75 Volt	890 Pkt	230 Pkt	72 Pcnt
1732248504	13.75 Volt	890 Pkt	230 Pkt	72 Pcnt
1732248204	13.75 Volt	880 Pkt	220 Pkt	72 Pcnt
1732247904	13.59 Volt	890 Pkt	220 Pkt	72 Pcnt
1732247904	13.59 Volt	890 Pkt	220 Pkt	72 Pcnt
1732247604	13.75 Volt	890 Pkt	230 Pkt	72 Pcnt
1732247304	13.75 Volt	890 Pkt	240 Pkt	71 Pcnt
1732247304	13.75 Volt	890 Pkt	240 Pkt	71 Pcnt
1732247004	13.75 Volt	870 Pkt	230 Pkt	71 Pcnt
1732246705	13.67 Volt	870 Pkt	230 Pkt	70 Pcnt
1732246704	13.67 Volt	870 Pkt	230 Pkt	70 Pcnt
1732246404	13.75 Volt	880 Pkt	240 Pkt	71 Pcnt
1732246104	13.75 Volt	870 Pkt	240 Pkt	71 Pcnt
1732246104	13.75 Volt	870 Pkt	240 Pkt	71 Pcnt
1732245804	13.75 Volt	850 Pkt	230 Pkt	72 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)