This is the latest recevied telemetry packets stored in our database for station/object SQ3KT-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1779764265 | 102 Count | 547 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1779762764 | 101 Count | 544 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1779761264 | 100 Count | 541 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1779760671 | 95 Count | 540 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1779759171 | 94 Count | 537 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1779757670 | 93 Count | 534 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1779756170 | 92 Count | 531 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1779754669 | 91 Count | 528 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1779753168 | 90 Count | 525 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1779751668 | 89 Count | 523 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1779750167 | 88 Count | 519 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1779748666 | 87 Count | 516 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1779747166 | 86 Count | 514 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1779745665 | 85 Count | 511 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1779744165 | 84 Count | 508 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1779742664 | 83 Count | 498 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1779741163 | 82 Count | 495 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1779739663 | 81 Count | 492 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1779739574 | 76 Count | 492 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1779736572 | 74 Count | 486 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1779735072 | 73 Count | 481 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1779733571 | 72 Count | 477 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1779732070 | 71 Count | 474 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1779731478 | 66 Count | 473 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1779729978 | 65 Count | 470 Count | 0 Count | 4.34 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)