This is the latest recevied telemetry packets stored in our database for station/object SR6ACZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | VBat* | Temp* | Wilg* | Cisn* | Value5* |
|---|---|---|---|---|---|
| 1786721404 | 13.54 V | 30.1 C | 34 % | 992 hPa | 0 |
| 1786720491 | 13.48 V | 29.9 C | 34 % | 992 hPa | 0 |
| 1786719582 | 13.56 V | 29.7 C | 35 % | 992 hPa | 0 |
| 1786718666 | 13.55 V | 29.4 C | 35 % | 992 hPa | 0 |
| 1786717753 | 13.58 V | 29.2 C | 35 % | 993 hPa | 0 |
| 1786716841 | 13.52 V | 29 C | 35 % | 993 hPa | 0 |
| 1786715928 | 13.52 V | 28.8 C | 36 % | 993 hPa | 0 |
| 1786715015 | 13.54 V | 28.6 C | 36 % | 993 hPa | 0 |
| 1786714104 | 13.57 V | 28.3 C | 36 % | 993 hPa | 0 |
| 1786713190 | 13.37 V | 28.1 C | 37 % | 993 hPa | 0 |
| 1786711364 | 13.54 V | 27.6 C | 37 % | 994 hPa | 0 |
| 1786710452 | 13.57 V | 27.2 C | 37 % | 994 hPa | 0 |
| 1786709539 | 13.53 V | 26.9 C | 38 % | 994 hPa | 0 |
| 1786706801 | 13.54 V | 25.8 C | 39 % | 994 hPa | 0 |
| 1786705892 | 13.52 V | 25.4 C | 39 % | 995 hPa | 0 |
| 1786704977 | 13.5 V | 25 C | 39 % | 995 hPa | 0 |
| 1786704063 | 13.44 V | 24.5 C | 39 % | 995 hPa | 0 |
| 1786703150 | 13.38 V | 24 C | 40 % | 995 hPa | 0 |
| 1786702238 | 13.3 V | 23.6 C | 40 % | 995 hPa | 0 |
| 1786701325 | 13.26 V | 23.1 C | 40 % | 995 hPa | 0 |
| 1786700412 | 13.17 V | 22.6 C | 40 % | 996 hPa | 0 |
| 1786699500 | 13.14 V | 22.1 C | 41 % | 996 hPa | 0 |
| 1786697674 | 13.08 V | 21.4 C | 41 % | 996 hPa | 0 |
| 1786696761 | 13.05 V | 21.1 C | 42 % | 996 hPa | 0 |
| 1786695849 | 12.94 V | 20.7 C | 42 % | 996 hPa | 0 |
*Used Equation Coefficients:
VBat: 0, 0.01, 0
Temp: 0, 0.1, 0
Wilg: 0, 1, 0
Cisn: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)