This is the latest recevied telemetry packets stored in our database for station/object S57AJJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | I acu* | I sol* | U2* | Rx1h* | Temp* |
|---|---|---|---|---|---|
| 1794907782 | 0 A | 0.58 A | 12.3 Volt | 500 Pkt | 8 C |
| 1794907482 | 0.12 A | 0.69 A | 12.4 Volt | 480 Pkt | 8 C |
| 1794907182 | 0.12 A | 0.58 A | 12.4 Volt | 500 Pkt | 8 C |
| 1794906882 | 0.12 A | 0.58 A | 12.4 Volt | 520 Pkt | 8 C |
| 1794906582 | 0 A | 0.58 A | 12.4 Volt | 510 Pkt | 8 C |
| 1794906282 | 0.12 A | 0.69 A | 12.4 Volt | 510 Pkt | 7.5 C |
| 1794905982 | 0.46 A | 1.04 A | 12.4 Volt | 520 Pkt | 7.5 C |
| 1794905682 | 0.12 A | 0.69 A | 12.4 Volt | 510 Pkt | 7.5 C |
| 1794905382 | 0.12 A | 0.69 A | 12.4 Volt | 530 Pkt | 7.5 C |
| 1794905082 | 0.12 A | 0.69 A | 12.4 Volt | 530 Pkt | 7.5 C |
| 1794904782 | 0.12 A | 0.69 A | 12.4 Volt | 530 Pkt | 7 C |
| 1794904482 | 0.12 A | 0.69 A | 12.3 Volt | 530 Pkt | 7 C |
| 1794904182 | 0.12 A | 0.69 A | 12.3 Volt | 530 Pkt | 7 C |
| 1794903882 | 0.12 A | 0.69 A | 12.3 Volt | 530 Pkt | 7 C |
| 1794903582 | 0.12 A | 0.69 A | 12.3 Volt | 530 Pkt | 7 C |
| 1794903282 | 0 A | 0.58 A | 12.3 Volt | 520 Pkt | 7 C |
| 1794902982 | -0.12 A | 0.46 A | 12.2 Volt | 530 Pkt | 7 C |
| 1794902682 | -0.23 A | 0.35 A | 12.2 Volt | 530 Pkt | 7 C |
| 1794902382 | -0.23 A | 0.35 A | 12.2 Volt | 540 Pkt | 6.5 C |
| 1794902082 | -0.23 A | 0.35 A | 12.2 Volt | 540 Pkt | 6.5 C |
| 1794901782 | -0.23 A | 0.35 A | 12.2 Volt | 540 Pkt | 6.5 C |
| 1794901482 | -0.12 A | 0.46 A | 12.2 Volt | 530 Pkt | 6.5 C |
| 1794901182 | -0.23 A | 0.35 A | 12.2 Volt | 540 Pkt | 6.5 C |
| 1794900882 | -0.23 A | 0.35 A | 12.2 Volt | 540 Pkt | 6.5 C |
| 1794900582 | -0.23 A | 0.35 A | 12.2 Volt | 550 Pkt | 6.5 C |
*Used Equation Coefficients:
I acu: 0, -0.1156, 14.6812
I sol: 0, 0.1156, -14.6812
U2: 0, 0.1, 0
Rx1h: 0, 10, 0
Temp: 0, 0.5, -64
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)