This is the latest recevied telemetry packets stored in our database for station/object F6DDS-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | U* | Rx1h* | Dg1h* | Eff1h* | A5* |
|---|---|---|---|---|---|
| 1745032049 | 9.75 Volt | 240 Pkt | 70 Pkt | 72 Pcnt | 0 None |
| 1745032047 | 9.75 Volt | 240 Pkt | 70 Pkt | 72 Pcnt | 0 None |
| 1745031747 | 0 Volt | 240 Pkt | 70 Pkt | 76 Pcnt | 0 None |
| 1745031447 | 8.78 Volt | 230 Pkt | 70 Pkt | 73 Pcnt | 0 None |
| 1745031147 | 10.5 Volt | 230 Pkt | 60 Pkt | 72 Pcnt | 0 None |
| 1745030848 | 18.9 Volt | 220 Pkt | 70 Pkt | 72 Pcnt | 0 None |
| 1745030847 | 18.9 Volt | 220 Pkt | 70 Pkt | 72 Pcnt | 0 None |
| 1745030547 | 6.98 Volt | 240 Pkt | 70 Pkt | 73 Pcnt | 0 None |
| 1745030250 | 0 Volt | 230 Pkt | 60 Pkt | 74 Pcnt | 0 None |
| 1745030247 | 0 Volt | 230 Pkt | 60 Pkt | 74 Pcnt | 0 None |
| 1745029947 | 0 Volt | 230 Pkt | 60 Pkt | 77 Pcnt | 0 None |
| 1745029647 | 3.68 Volt | 230 Pkt | 60 Pkt | 76 Pcnt | 0 None |
| 1745029347 | 10.88 Volt | 240 Pkt | 60 Pkt | 77 Pcnt | 0 None |
| 1745029048 | 1.43 Volt | 230 Pkt | 60 Pkt | 77 Pcnt | 0 None |
| 1745029047 | 1.43 Volt | 230 Pkt | 60 Pkt | 77 Pcnt | 0 None |
| 1745028747 | 0 Volt | 230 Pkt | 60 Pkt | 75 Pcnt | 0 None |
| 1745028447 | 17.1 Volt | 230 Pkt | 60 Pkt | 73 Pcnt | 0 None |
| 1745028147 | 0 Volt | 230 Pkt | 60 Pkt | 71 Pcnt | 0 None |
| 1745027847 | 18.08 Volt | 240 Pkt | 60 Pkt | 73 Pcnt | 0 None |
| 1745027547 | 0 Volt | 250 Pkt | 70 Pkt | 74 Pcnt | 0 None |
| 1745027248 | 10.88 Volt | 240 Pkt | 70 Pkt | 72 Pcnt | 0 None |
| 1745027247 | 10.88 Volt | 240 Pkt | 70 Pkt | 72 Pcnt | 0 None |
| 1745026947 | 0 Volt | 240 Pkt | 70 Pkt | 68 Pcnt | 0 None |
| 1745026650 | 17.18 Volt | 240 Pkt | 70 Pkt | 67 Pcnt | 0 None |
| 1745026647 | 17.18 Volt | 240 Pkt | 70 Pkt | 67 Pcnt | 0 None |
*Used Equation Coefficients:
U: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)