This is the latest recevied telemetry packets stored in our database for station/object EL-BH1LIC. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1750048584 | 0 | 123 | 0 | 16 | 0 |
| 1750047984 | 0 | 177 | 0 | 27 | 0 |
| 1750047384 | 0 | 145 | 0 | 1 | 0 |
| 1750046784 | 0 | 4 | 0 | 1 | 0 |
| 1750046184 | 0 | 0 | 0 | 0 | 0 |
| 1750045584 | 0 | 0 | 0 | 0 | 0 |
| 1750044984 | 0 | 4 | 0 | 1 | 0 |
| 1750044384 | 0 | 1 | 0 | 1 | 0 |
| 1750043784 | 0 | 227 | 0 | 2 | 0 |
| 1750043184 | 0 | 4 | 0 | 1 | 0 |
| 1750042584 | 0 | 0 | 0 | 0 | 0 |
| 1750041984 | 2 | 1 | 1 | 1 | 0 |
| 1750041384 | 1 | 4 | 1 | 1 | 0 |
| 1750040784 | 0 | 4 | 0 | 4 | 0 |
| 1749977047 | 0 | 0 | 0 | 0 | 0 |
| 1749976447 | 0 | 4 | 0 | 1 | 0 |
| 1749975851 | 0 | 0 | 0 | 0 | 0 |
| 1749975248 | 0 | 0 | 0 | 0 | 0 |
| 1749974647 | 0 | 4 | 0 | 1 | 0 |
| 1749974047 | 0 | 0 | 0 | 0 | 0 |
| 1749973447 | 0 | 0 | 0 | 0 | 0 |
| 1749972847 | 0 | 4 | 0 | 1 | 0 |
| 1749972247 | 0 | 0 | 0 | 0 | 0 |
| 1749971647 | 0 | 12 | 0 | 6 | 0 |
| 1749971048 | 0 | 190 | 0 | 30 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)